网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题 - 气液增压泵如何增加压力工

气液增压泵如何增加压力工作?

发布时间:2022-01-11 15:49:05   发布人:http://www.sdjingtuo.com
压力建立后,泵自动停止,没有噪音不,不消耗能源,更为环保。
After the pressure is established, the pump will stop automatically. There is no noise, no energy consumption and more environmental protection.
没有工作介质温升现象,适合在夏季及闷热无通风场合使用。
There is no temperature rise of working medium, which is suitable for use in summer and stuffy places without ventilation.
不需要电源,适合无电源或防爆场合。
It does not need power supply and is suitable for occasions without power supply or explosion-proof.
体积小配置灵活,可自带油箱,也可远端供油,节省安装空间。输出压力可达上百兆帕,但不同输出压力产品之间的价格差异不大。
Small size, flexible configuration, can bring its own oil tank or remote oil supply to save installation space. The output pressure can reach hundreds of MPA, but the price difference between products with different output pressure is small.
压力没有冲击,更安全,对设备和零件没有损伤。
气液增压泵
The pressure has no impact, is safer, and has no damage to equipment and parts.
便于维护,泵体结构设计模块化,所有易损件均为标准件,方便安装及拆卸。 气压驱动不需额外的在线润滑管路,既节约了运行成本又避免了油雾对环境 的污染以及人体的伤害。
It is convenient for maintenance, the structural design of the pump body is modular, and all vulnerable parts are standard parts, which is convenient for installation and disassembly. Pneumatic drive does not need additional on-line lubrication pipeline, which not only saves the operation cost, but also avoids the pollution of oil mist to the environment and human body.
频繁的启动、停止对泵无任不良影晌。
Frequent start and stop have no adverse effect on the pump.
预留密封泄漏溢流孔,在保护泵体同时,亦可及时发现泵的故障。
Reserve sealing leakage overflow hole to protect the pump body and find the pump fault in time.
采用换向阀外置,便于维修更换,并且寿命更长。
The external reversing valve is adopted, which is convenient for maintenance and replacement, and has a longer service life.
在泵的压力范围内,通过调节输入气压,输出液体压力即可得到相应调整。
Within the pressure range of the pump, the output liquid pressure can be adjusted accordingly by adjusting the input air pressure.
根据现场工况要求,从简单的手动操作到全自动控制。
According to the requirements of field working conditions, from simple manual operation to full-automatic control.
增压介质多样,水、油、冷却液、润滑油以及有腐蚀性流体均可以使用。
Various pressurization media, such as water, oil, coolant, lubricating oil and corrosive fluid, can be used.
感谢您的阅读,此文的文章来源:气液增压泵更多的内容和问题请点击:http://www.sdjingtuo.com我们会继续努力的为您提供服务,感谢您的支持!
Thank you for reading. Source of this article: gas-liquid booster pump. For more contents and questions, please click: http://www.sdjingtuo.com We will continue to work hard to provide you with services. Thank you for your support!
新闻推荐:
气液增压泵如何增加压力工作? 2022-01-11
新买的增压泵为啥呢么需要一直加压? 2021-12-30
气体增压泵是如何保证自己的生产进度的? 2021-12-16
气体增压泵在工厂使用要注意哪些优势? 2021-12-09
气体增压泵空气增压泵可以使用多长时间? 2021-11-30
气液增压泵施工步骤是先怎么操作? 2021-11-18
气液增压机的上模安装要注意什么? 2021-11-10
气体增压泵与气液增压泵的区别! 2021-10-20
为什么气体增压泵经常突然不工作了? 2021-10-13
气体增压设备一般的组成部分是? 2021-10-06

13188935873

qq