热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题管道增压泵安装要注意哪些

管道增压泵安装要注意哪些事项?

发布时间:2023-11-14 10:23:53   发布人:http://www.sdjingtuo.com
(1)安装管道增压泵前,进水管道应该进行清洗,假如不可以保证管道离有没有异物,可以在增压泵吸入口前安装过滤网,以此来确保其正常运行。 (2)假如出口端的截止阀关闭,需要在出水口管路上安装旁通管路来确保管道增压泵的润滑和冷却水过泵。
(1) Before installing the pipeline booster pump, the inlet pipeline should be cleaned. If it is not possible to ensure that there are no foreign objects in the pipeline, a filter screen can be installed in front of the suction port of the booster pump to ensure its normal operation. (2) If the shut-off valve at the outlet is closed, a bypass line needs to be installed on the outlet pipeline to ensure that the lubrication and cooling water of the pipeline booster pump pass through the pump.
(3)进水管道安装时应该避免气囊的产生。
(3) When installing the water inlet pipeline, the generation of airbags should be avoided.
(4)多级增压泵安装时不可以把电机倒挂在水平面上。
(4) When installing a multi-stage booster pump, it is not allowed to hang the motor upside down on a horizontal surface.
气体增压泵
(5)管道增压泵进出口部位有箭头标志,表示液体经过增压泵时的方向,开机前应该检查液体是否轻松通过。
(5) There are arrow marks at the inlet and outlet of the pipeline booster pump, indicating the direction of the liquid passing through the booster pump. Before starting, it is necessary to check whether the liquid can easily pass through.
(6)增压泵应该安装在干燥通风处,增压泵和电机距离障碍物有一定的距离,使电机的冷却风扇周围有足够的空气。
(6) The booster pump should be installed in a dry and ventilated area, with a certain distance between the booster pump and the motor from obstacles, so that there is sufficient air around the cooling fan of the motor.
(7)管道增压泵可以安装在混凝土或者有适合高度的基础上,又能安装在固定的地面上。需要注意的是不要把管路的重量强加在泵体上,可以避免损坏泵。
(7) The pipeline booster pump can be installed on concrete or a suitable height foundation, and can also be installed on a fixed ground. It should be noted that the weight of the pipeline should not be imposed on the pump body to avoid damaging the pump.
(8)为了使进口摩擦损失减小,应该尽量缩短进水管路。
(8) In order to reduce the friction loss at the inlet, the inlet pipeline should be shortened as much as possible.
本文由气体增压泵友情奉献.更多有关的知识请点击:http://www.sdjingtuo.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is dedicated to the friendship of gas booster pumps. For more relevant knowledge, please click on: http://www.sdjingtuo.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
新闻: