网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

网站公告

当前位置:首页 - 网站公告 - 气动氦气增压泵的适应性能

气动氦气增压泵的适应性能及范围

发布时间:2019-06-03 16:51:59   发布人:http://www.sdjingtuo.com
1、驱动介质:多种气体驱动:紧缩空气、液化氮气和管道氮气、水蒸气。
1. Driving media: multi-gas drive: compressed air, liquefied nitrogen and pipeline nitrogen, water vapor.
2、输出流量大:只需0.3-0.69MPa紧缩空气驱动就可取得较大的输出流量。
2. Large output flow: only 0.3-0.69MPa compressed air drive can achieve a larger output flow.
3、自动保压:工作时,疾速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至中止。并坚持这个压力,此时耗费能量很小,无热量产生,无零件运动。当压力均衡突破后,气动增压泵自动开端工作到下一个均衡。
3. Automatic Pressure Maintenance: When working, the reciprocating speed of the pump slows down until it stops as the output pressure approaches the set pressure value. And adhere to this pressure, at this time energy consumption is very small, no heat generation, no part movement. When the pressure balance breaks through, the pneumatic booster pump automatically starts to work to the next equilibrium.
4、材质优秀:高压局部材质为不锈钢。高压柱塞材质为不锈钢,并采用双层密封。
4. Excellent material: High-pressure local material is stainless steel. The material of high pressure plunger is stainless steel and double-layer seal is adopted.
5、维护简单:GRPS气动增压泵的零件及密封少,维护简单且本钱低。相同系列泵的一切"O"型圈,维修包易损部件可互相交换,大大降低了维修本钱。气动增压泵出厂前已加注光滑剂,工作时无需外部光滑。
气体增压泵
5. Simple maintenance: GRPS pneumatic booster pump has fewer parts and seals, simple maintenance and low cost. All O-rings of the same series of pumps can be exchanged between the vulnerable parts of the repair kit, which greatly reduces the cost of maintenance. The pneumatic booster pump has been injected with smoothing agent before leaving the factory, so it does not need external smoothing when working.
运用范围:
Scope of application:
1、气密性检测:如航空铸件、元件检测、发起气缸的密封检测;空调管路、暖风芯、气缸密封、汽车制动系统和其它设备;泵体及阀门:气体密封耐压测试及水中冒泡实验;平安阀检测;毛细管检测;
1. Air tightness testing: such as airborne casting, component testing, starting cylinder sealing testing; air conditioning pipeline, warm air core, cylinder sealing, automobile brake system and other equipment; pump body and valve: gas seal pressure test and water bubbling test; safety valve testing; capillary testing;
2、充气:高压气源:如校验仪器的高压气源;飞机轮胎充气;高压氧气空气、规范气体充装以及昂贵气体的回收充气;气弹簧充气
2. Inflation: High-pressure air source: such as high-pressure air source of calibration instrument; inflatability of aircraft tyres; high-pressure oxygen air, standard gas filling and recovery of expensive gas inflatability; inflatability of air spring
3、高压气源:消费动力、流水线检测之用;等静压机;可提供模仿实验高压气源;高压露点仪检测高压气源;浸透实验
3. High Pressure Gas Source: Used for Consumer Power and Pipeline Detection; Isostatic Press; High Pressure Gas Source for Imitating Experiments; High Pressure Dew Point Meter for Detecting High Pressure Gas Source; Immersion Experiments
机械、机电、设备 ? 泵,我们主要是做
Machinery, electromechanical, equipment? Pumps, we mainly do
蓄能器充氮车,CNG气密性检测设备,气体增压泵,气体增压系统,电动气体增压泵,计量泵
Accumulator nitrogen charging vehicle, CNG gas tightness testing equipment, gas booster pump, gas booster system, electric gas booster pump, metering pump
以上的精彩内容有气体增压泵http://www.sdjingtuo.com 提供技术支持,我们的网站上会继续为大家呈现很多的新鲜资讯,请记得关注我们!
The above wonderful content includes the technical support provided by the gas booster pump http://www.sdjingtuo.com. Our website will continue to present a lot of fresh information for you. Please remember to pay attention to us!

13188935873

qq