空气增压泵是以压缩空气为动力源的一种活塞增压阀。主要适用于需要高压气体的场合，给未达到标准气压的气体增加压力，可将普通气源压力提升几十上百倍。那么空气增压泵不同时工作什么原因呢？下面气体增压泵厂家为您讲解一番。

Air booster pump is a piston booster valve with compressed air as power source. It is mainly applicable to the occasions where high-pressure gas is required. It can increase the pressure of the gas that does not reach the standard pressure, and can increase the pressure of the common gas source by tens or hundreds of times. So what is the reason why the air booster pump does not work at the same time? The gas booster pump manufacturer will explain it to you.

1、当进气源进入增压阀时气控阀芯往复切换工作，使增压阀快速往复工作，提升气体压力，以达到所需或设置压力值，随着压力的提高，活塞往复频率越来越慢，当达到所需压力值是增压阀自动停止工作，此时将不再消耗气源。当气体压力因使用所降低少于所需值时，增压阀将自动启动，将压力值增加到所需之后自动停止。所以增压阀属于自动工作，操作简单。

1. When the inlet air enters the pressurization valve, the pneumatic control valve core switches back and forth to make the pressurization valve work quickly and back to raise the gas pressure to reach the required or set pressure value. With the increase of the pressure, the reciprocating frequency of the piston becomes slower and slower. When the required pressure value is reached, the pressurization valve automatically stops working, and the air source will no longer be consumed. When the gas pressure decreases less than the required value due to use, the booster valve will start automatically and stop automatically after the pressure value is increased to the required value. Therefore, the booster valve is automatic and easy to operate.

2、主要适用于阀门、管件、压力容器、仪器仪表等耐压和爆破测试场合。

2. It is mainly applicable to pressure and explosion test occasions such as valves, pipe fittings, pressure vessels, instruments and meters.

造成增压泵不能正常工作的原因包括：

The reasons for the booster pump not working normally include:

1、驱动活塞密封件遭到磨损而导致活塞上侧和下侧出现串气现象；

1. The seal of the driving piston is worn, resulting in cross-talk between the upper and lower sides of the piston;

2、换向阀不干净会或是因密封件损坏而导致其无法正常运动；

2. If the reversing valve is not clean, or the seal is damaged, it will not move normally;

3、两活塞连接处遭到损坏，开口销脱落，两活塞杆出现错位现象而导致活塞杆不能移动；

3. The connecting part of the two pistons is damaged, the cotter pin falls off, and the two piston rods are misaligned, resulting in the piston rod cannot move;

4、增压缸密封件出现漏气现象等。

4. Air leakage occurs in the seal of booster cylinder.

此外空气增压泵工作原理类似于压力增压器，对大径空气驱动活塞施加一个很低的压力，当此压力作用于一个小面积活塞上时，产生一个高压。通过一个二位五通气控换向阀，增压泵能够实现连续运行。更多相关内容就来我们网站http://www.sdjingtuo.com咨询了解吧。

In addition, the working principle of the air booster pump is similar to that of the pressure booster, which applies a very low pressure to the large-diameter air driven piston. When this pressure acts on a small area piston, a high pressure will be generated. Through a two position five ventilation control reversing valve, the booster pump can realize continuous operation. For more information, please visit our website http://www.sdjingtuo.com Consult and understand.