热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态增压泵为什么带气罐

增压泵为什么带气罐

发布时间:2022-08-17 14:28:24   发布人:http://www.sdjingtuo.com
增压泵主要作用是对压缩压力不足进行二次增压使用,多用在工厂局部气压不足使用,不用对气体管路进行改造,不用添置高压空压机。具有经济实惠,防爆,噪音低等多种优点。那么,气液增压泵厂家就来为您讲讲增压泵为什么要加一个气罐。
The booster pump is mainly used for secondary pressurization when the compression pressure is insufficient. It is mostly used in the factory where the local air pressure is insufficient. It is unnecessary to reform the gas pipeline and add a high-pressure air compressor. It has many advantages such as economy, safety, explosion-proof and low noise. Then, the gas-liquid booster pump manufacturer will tell you why the booster pump needs to add an air tank.
其实增压泵要不要加气罐,要看具体情况,并不是说一定要加的。如果你需要增压泵打压压力更稳定的话,那么增压泵是要搭配储气罐的,因为储气罐是专门用来储存气体的设备,同时起稳定系统压力的作用。
In fact, whether the booster pump needs to be filled with gas tank depends on the specific situation, not necessarily. If you need the booster pump to make the pressure more stable, the booster pump should be equipped with an air tank, because the air tank is a device specially used to store gas and plays a role in stabilizing the system pressure.
因为增压泵自身的原因导致增压后的气体不是一直输出而是像活塞式空压机一样,一股一股的输出这样会导致部分设备因为脉冲使用不正常,这个时候就需要一个储气罐来缓解脉冲的影响和瞬间释放的大流量需求。
Because of the booster pump's own reasons, the pressurized gas is not always output but is output one by one like the piston air compressor. This will cause some equipment to use abnormally because of the pulse. At this time, an air tank is needed to mitigate the impact of the pulse and the large flow demand of the instantaneous release.
增压泵加储气罐的作用有2点:
The booster pump and the air reservoir have two functions:
1、减小增压泵的脉冲
1. Reduce the pulse of booster pump
2、事先储存一部分高压气体防止瞬间耗气量根不上。配储气罐的情况下可以在配上减压阀。不然也会有压力高低变化,配上减压阀可以控制压力波动。
2. Store a part of high-pressure gas in advance to prevent instantaneous gas consumption. In the case of an air tank, a pressure reducing valve can be equipped. Otherwise, there will be changes in pressure, and the pressure fluctuation can be controlled with a pressure reducing valve.
气液增压泵
怎么配储气罐比较合适呢?这就要牵涉到每分钟气动增压泵增压多少流量和压力了,一般配储气罐的耐压能力要超出增压泵的产生的高压力;
How to match the air tank properly? This will involve how much flow and pressure the pneumatic booster pump pressurizes per minute. Generally, the pressure resistance of the air storage tank exceeds the high pressure generated by the booster pump;
此外要注意配的储气罐的大小要对应气动增压泵的流量如XXX流量是1200L/min,配20L的储气罐就会显小导致增压泵频繁工作,加大增压泵的工作量影响增压泵的使用寿命,少要配40L的气罐让他有个缓冲量。
In addition, it should be noted that the size of the equipped air tank should correspond to the flow of the pneumatic booster pump. For example, the flow of XXX is 1200L / min, and the 20L air tank will be significantly smaller, which will lead to frequent operation of the booster pump, increase the workload of the booster pump and affect the service life of the booster pump. The 40L air tank should be equipped less to provide a buffer capacity.
还要注意储气罐的接口不要因为接口太小而影响到使用流量,如XXX流量是4000L/min,接口您用3分的入口,那么您输出到增压泵到储气罐的瞬间气体都达不到4000L/min,您配ZTV02-3就没多大意义了。更多相关事项就来我们网站http://www.sdjingtuo.com咨询看看吧。
It is also important to note that the interface of the air reservoir should not affect the use flow because the interface is too small. For example, the flow of XXX is 4000L / min, and you use a 3-minute inlet for the interface, so the instantaneous gas output from the booster pump to the air reservoir cannot reach 4000L / min, so it is meaningless for you to configure ztv02-3. For more information, please visit our website http://www.sdjingtuo.com Let's consult.
新闻: