热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题小型气液增压泵设备介绍

小型气液增压泵设备介绍

发布时间:2020-03-24 10:22:58   发布人:http://www.sdjingtuo.com
  如今,随着工业的快速发展,工厂或实验室使用气体的压力越来越大。相应于气液增压泵的诞生,气液增压泵的初始体积比较大,能耗也比较高。随着科学技术的进步,气体增压泵技术越来越成熟。针对空间相对较小的情况,机械或实验室研发生产微型和小型气体增压泵,解决了许多客户因空间小而压力不足的问题。你对小型气液增压泵设备了解多少?跟随小型气液增压泵设备厂家一起看。
  Nowadays, with the rapid development of industry, the pressure of gas used in factories or laboratories is increasing. Corresponding to the birth of gas booster pump, the initial volume of gas-liquid booster pump is relatively large, and the energy consumption is also relatively high. With the progress of science and technology, gas booster pump technology is more and more mature. In view of the relatively small space, the mechanical or laboratory research and development and production of micro and small gas booster pumps solve the problem that many customers lack of pressure due to the small space. What do you know about the small gas-liquid booster pump? Follow the small gas-liquid booster pump manufacturers.
气液增压泵
  小型气液增压泵参数:
  Parameters of small gas-liquid booster pump:
  1. 加压介质:各种非腐蚀性清洁气体。
  1. Pressure medium: various non corrosive clean gases.
  2. 加压压力:80MPA。
  2. Maximum pressure: 80MPa.
  3.单机流量:1200L/min(多机并联流量可更大)。
  3. Single machine maximum flow: 1200L / min (multi machine parallel flow can be larger).
  4. 单位空气消耗:900L/min。
  4. Maximum unit air consumption: 900l / min.
  5. 驱动压力:2-8bar(6-8bar驱动)。
  5. Driving pressure: 2-8bar (6-8bar optimal driving).
  小型气液增压泵的结构和材料:
  Structure and material of small gas-liquid booster pump:
  小型气液增压泵一般分为增压部分、驱动部分和控制部分。增压件大致有前后增压端盖铸钢、双增压缸内缸体304外铸钢、单向阀垫片1套。传动部分主要由前后端盖铸钢,铝合金驾驶缸、304年前后撞针钢铁和密封圈(函数控制换向部分),高、低压空气交换钢管304材料,推动活塞和活塞杆密封圈等。控制部分为驱动腔铸钢,换向阀分为外阀套,内阀芯由铝合金和密封圈组成。
  Small gas-liquid booster pump is generally divided into supercharging part, driving part and control part. The supercharging parts are generally composed of front and rear supercharging end cover cast steel, double supercharging cylinder body 304 outer cast steel and one set of one-way valve gasket. The transmission part is mainly composed of front and rear end cover cast steel, aluminum alloy driving cylinder, steel and sealing ring (function control reversing part), high and low pressure air exchange steel pipe 304 material, driving piston and piston rod sealing ring, etc. The control part is cast steel for driving chamber, the reversing valve is divided into outer valve sleeve, and the inner valve core is composed of aluminum alloy and sealing ring.
  空气增压泵一般用于工厂车间的局部增压和稳压。当来自车间的压缩空气通过管道到达使用终点时,压力会消失。此时,压缩空气的压力不能满足某些气缸和夹具的压力要求。压缩空气增压泵必须按要求配置。空气增压泵是由空气增压泵厂家引进,结合国内工厂实际情况开发的一种新型的空气增压泵系统。现在小编将为您详细介绍这款设备的性能。
  Air booster pump is generally used for local pressurization and pressure stabilization in the workshop. When the compressed air from the workshop reaches the end of use through the pipeline, the pressure will disappear. At this time, the pressure of compressed air can not meet the pressure requirements of some cylinders and clamps. The compressed air booster pump must be configured as required. Air booster pump is a new type of air booster pump system introduced by air booster pump manufacturers and developed in combination with the actual situation of domestic factories. Now Xiaobian will give you a detailed introduction to the performance of this device.
  由于空气增压泵的输出压力不稳定,所以在正常情况下可配套20L、40L、70L气罐和减压阀,压力表共同构成空气增压泵系统的成套设备。空气增压泵产生的高压气体储存在后续的储气罐中,通过高压减压阀将压力降工作压力,以保证出口压力的稳定输出。
  Because the output pressure of air booster pump is not stable, 20L, 40L and 70L air tanks and pressure reducing valves can be equipped under normal conditions. The pressure gauge together constitutes a complete set of equipment of air booster pump system. The high pressure gas produced by the air booster pump is stored in the subsequent air storage tank, and the pressure is reduced to the working pressure through the high pressure reducing valve to ensure the stable output of the outlet pressure.
  以上是气液增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.comThe above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com
新闻: