The gas booster pump is composed of a reciprocating large area piston driven by air directly connected with a small area gas piston through a connecting rod. The inlet and outlet one-way valves are included in the end cap of each gas chamber, and the air drive part includes a circulating shaft and a guide valve. When driving gas, the two provide continuous reciprocating motion.
The separation of the gas compression chamber and the air driving chamber in the gas booster pump is provided by a three-stage dynamic sealing device. The part between the two cavities communicates with the air. This design can ensure that compressed gas is not polluted by driving gas.
The gas booster pump makes full use of the characteristic that the temperature of the driving gas decreases remarkably after success. The low temperature driving gas discharged is used as a coolant to pass into the heat exchanger of the supercharger to cool the steel sleeve of the high pressure output gas and the supercharger.
Gas booster pump mainly includes AG series, AGT series, 8AGD series, 14AGT series, pneumatic gas booster pump is to pressurize low pressure gas into high pressure gas, high pressure range from 10 Mpa, 15 Mpa, 20 Mpa, 35 Mpa, 50 Mpa, 70 Mpa, 140 Mpa, maximum 210 Mpa, air booster mainly includes HAA series, AA series, AAD series, 8 AAD series. It is used to pressurized air lines or equipment, and the air pressure is booster from 0.4Mpa to 31Mpa.
Air clamp and roller clamp power, cushion pad pressure, air spring and high pressure tire inflation, provide valve driving force, valve fittings pressure vessel Aerospace accessories air pressure test, wellhead device water bubble test, vehicle braking system test, communication cable inflation equipment, aircraft tire hydraulic accumulator nitrogen, air Bulk injection molding, high pressure nitrogen gas charging, ultra pure gas compression (CO2 super transient extraction).