The application of the stamping workshop:
There will be a lot of punching machines in the stamping shop. The structure of the large press consists of the fuselage, the slide block, the working table and the clamping mechanism at the top. Cases of pneumatic booster pump is widely applied for hafei. The air - liquid pump is installed on the slide block (the hammer head) to tighten the upper die. On the workbench, there is a clamping device to tighten the lower die, or to lift the product.
Application of welding shop
The general welding shop can use the supercharged pump in two positions: one is that there will be a clamping fixture in the welding. In general, hydraulic loading will be used. For example, the side position and the roof are fitted. Two is in the welding and coating of the junction. Because the car factory equipped with welding and coating is required to replace the hanger (the car carrying the white body on the conveyor line). Where will there be a rotating hydraulic lift car here. We can use our hydraulic pump here.
Application of painting workshop
There are two pumps that can be used in the painting workshop: the first is to skid the car in the coating line. Then the palletizing and palletizing of the skid in the painting workshop will be used in our pumps. The two is that there will be a sewage treatment plant in the painting workshop. A sewage treatment plant has a device called a mud pressure device (that is, the mud finished by the sewage is pressed into a solid block).
Application of general assembly shop
The assembly shop can be used by some companies. As an interior assembly workshop Hafei friction skid type transfer mechanism at both ends of transmission lines each have a small hydraulic lifting device. We can use our pump here. And the engine lifting device. In every assembly workshop there is a device to install the engine on the body, and that will also be used in our pumps.
In addition to Changchun departemnt stamping application can be extended to. There is a market. Almost every car production line can be used for more than a dozen. The existing automobile production line can be transformed, and it is a little difficult. There is also a market.
The above knowledge provided by gas booster pump http://www.sdjingtuo.com, our company will uphold the integrity and win-win cooperation and development policy, to provide services for the community, thank you for your visit!