对于增压泵，想必有不少人都很了解吧，特别是一些比较高的地方，是很容易存在水压不足的情况，从而导致供水不足问题。那么增压泵一直响怎么解决呢？下面
气体增压泵厂家为您解说。
As for booster pump, many people must know it very well, especially in some high places, it is easy to have insufficient water pressure, which leads to insufficient water supply. How to solve the problem that the booster pump keeps ringing? The manufacturer of the gas booster pump will explain.
1、先检查泵与吸水面之间的高度，超过3米就会出现汽蚀现象，泵腔内就会一直响，调整下高度就能解决。
1. First check the height between the pump and the suction surface. If it exceeds 3m, cavitation will occur, and the pump chamber will keep ringing. Adjust the lower height to solve the problem.
2、再查看泵内是否存在空气，使用前未排气，内部空气在运转时就会一直响，需要将其排除才能解决。
2. Then check whether there is air in the pump. If the air is not exhausted before use, the internal air will keep ringing during operation. It needs to be eliminated to solve the problem.
3、后检查风罩位置，若是与扇叶有摩擦就会响，需要调整位置。
3. After that, check the position of the fan hood. If there is friction with the fan blade, it will make a noise, and the position needs to be adjusted.
此外还有可能是这样的原因：
There may also be such reasons:
（1）多级增压泵因为吸入了过多杂质，导致叶轮发生变形。
(1) The impeller of the multi-stage booster pump is deformed due to excessive impurities.
（2）自来水增压泵电机风罩和风叶撞击产生的响声。
(2) The noise generated by the collision between the fan cover and the fan blade of the tap water booster pump motor.
（3）增压泵制造精度不正确，叶轮和泵腔直接有摩擦，运行时会有响声，工作久了降低效率。
(3) The manufacturing accuracy of the booster pump is incorrect. There is friction between the impeller and the pump chamber, which makes a noise during operation. After a long time of operation, the efficiency will be reduced.
（4）确认吸水管是否偶尔露出水面，使增压泵吸水时吸入空气进而产生异响。
(4) Confirm whether the suction pipe is exposed to the water occasionally, so that the booster pump can inhale air and make abnormal noise when absorbing water.
（5）热水增压泵在正式运行前，行排气，如果没有排气，里面有空气时，也会出现响声。
(5) Before the formal operation of the hot water booster pump, exhaust first. If there is no exhaust, there will be a noise when there is air inside.
（6）以上情况都排除了，请拆开电机防风罩，用手缓慢摇动，查看是否有明显的摩擦现象。还有就是需要注意风罩和风扇叶子是否有摩擦，请注意及时排除。
(6) All the above conditions have been eliminated. Please remove the motor windshield and slowly shake it with your hands to see if there is any obvious friction. Also, pay attention to whether there is friction between the fan cover and the fan leaves. Please remove it in time.
Editor's summary: The above is about how to solve the problem of the booster pump's constant noise. I hope the content shared by Xiao Bian can give you some reference. If you want to know more about it, you can follow our website http://www.sdjingtuo.com real-time info
