在使用气体增压泵的过程中，温度很高的话，常常会引起空气增压泵的高温故障，增压泵的高温问题不容忽视。下面小编为您
In the process of using the gas booster pump, if the temperature is very high, it will often cause the high temperature fault of the air booster pump. The high temperature problem of the booster pump cannot be ignored. The following is for you
气体增压泵过热不仅会影响其正常的性能，也会影响其使用寿命。气体气体增压泵若发生故障问题，还会影响到整个气体气体增压系统的工作运行。
Overheating of gas booster pump will not only affect its normal performance, but also affect its service life. If the gas booster pump fails, it will also affect the operation of the entire gas booster system.
导致压缩空气增压泵温度过高的一个原因就是增压泵的使用环境温度过高，如果环境温度过高，会导致增压泵内部的气体元件温度过高。降低使用环境的温度，可加装风扇或用水冲刷地面。
One reason for the high temperature of the compressed air booster pump is that the ambient temperature of the booster pump is too high. If the ambient temperature is too high, the temperature of the gas element inside the booster pump will be too high. To reduce the temperature of the operating environment, install fans or flush the ground with water.
还有就是使用场合的通风不良，如增压泵本身的气体管道堵塞，会影响气体增压泵内部的散热，导致增压泵过热。定期检修气体增压泵，气体管道的垃圾，顺畅风道。
There is also poor ventilation at the use site, such as the blockage of the gas pipe of the booster pump itself, which will affect the heat dissipation inside the gas booster pump, causing the booster pump to overheat. Regularly repair the gas booster pump, remove the garbage from the gas pipeline and smooth the air duct.
如气体增压泵本身的气体管道堵塞，会影响气动增压泵内部的散热，导致空气增压器过热。定期检修济南德科气体增压泵，气体管道的垃圾，顺畅风道。
If the gas pipe of the gas booster pump itself is blocked, the heat dissipation inside the pneumatic booster pump will be affected, resulting in overheating of the air booster. Regularly check and repair the Jinan Deke gas booster pump, remove the garbage from the gas pipeline, and smooth the air duct.
气体增压泵润滑油是有限的，当使用到一定程度却没有适当添加润滑的时候，气体增压泵体内部摩擦会把大量的热会积聚在气体增压泵的内部散不出去。进体增压泵润滑检修，适当添加润滑油。
The lubricating oil of the gas booster pump is limited. When it is used to a certain extent without proper lubrication, the internal friction of the gas booster pump will accumulate a lot of heat inside the gas booster pump. Conduct lubrication maintenance of gas booster pump and add lubricating oil appropriately.
When the load carried by the gas booster pump is too heavy, it will produce excessive airflow and generate a lot of heat due to mutual friction. This can be avoided by reducing the load of the gas booster pump. More relevant precautions come to our website http://www.sdjingtuo.com Ask.
