速度快：
Fast speed:
气液增压缸动作速度较液压传动快，且较气压传动稳定。
The action speed of gas-liquid booster cylinder is faster than that of hydraulic transmission and more stable than that of pneumatic transmission.
出力大：
Large output:
在相同途径条件下，气液增压缸可达油压机之高出力（1~200吨）,非纯气压系统可达到。
Under the same way, the gas-liquid booster cylinder can reach the high output of the oil press (1 ~ 200 tons), and the non pure air pressure system can reach.
不损模：
No mold damage:
的软到位冲压技术，预压行程快速且以极小的力度接触工件表面，整体提高了加工品质和模具使用寿命。
Advanced soft in place stamping technology, fast preloading stroke and contact the workpiece surface with minimal force, which improves the processing quality and die service life as a whole.
零泄漏：
Zero leakage:
能量转换方便，可以做到零內漏不必担心环境污染。
Energy conversion is convenient, zero internal leakage can be achieved, and there is no need to worry about environmental pollution.
低故障：
Low fault:
纯气源驱动（仅需4~7公斤气源压力），无油压系统温升之困扰。
Pure air source drive (only 4 ~ 7kg air source pressure), without the trouble of temperature rise of oil pressure system.
：
Energy saving and environmental protection:
纯气源驱动，零污染，耗气量仅为气缸的16.3%，耗电/使用成本比油压缸低（实际能耗相当于油压系统10%－30%）。
Driven by pure air source, with zero pollution, the air consumption is only 16.3% of that of the cylinder, and the power consumption / use cost is lower than that of the oil cylinder (the actual energy consumption is equivalent to 10% - 30% of the oil pressure system).
空间小：
Small space:
与普通气缸及液压站相比，气液增压缸占用空间面积可小于50%以上。
Compared with ordinary cylinders and hydraulic stations, the space occupied by gas-liquid booster cylinders can be less than 50%.
易安装：
Easy to install:
法兰板等安装固定，有多种安装方式（正装倒装水平安装及任意角度安装等），根据不同工作场合可在任意角度和位置安装。
Flange plates are installed and fixed. There are many installation methods (front installation, reverse installation, horizontal installation and installation at any angle). They can be installed at any angle and position according to different working occasions.
易控制：
Easy to control:
只需要一个或两个电磁阀控制，可实现手动脚踏及全自动控制等。
Only one or two solenoid valves are needed to control, which can realize manual pedal and full-automatic control.
易维护：
Easy maintenance:
产品结构简单紧凑，较油压系统等维护简便。
The product structure is simple and compact, and the maintenance is simpler than that of oil pressure system.
性价比高：
Cost effective:
设备单价较油压系统低廉。
The unit price of the equipment is lower than that of the oil pressure system.
寿命长：
Long life:
正常使用的情况下，平均使用寿命可达5年以上。
Under normal use, the average service life can reach more than 5 years.
玖容气液增压缸除了以上优点，还有以下优势：
In addition to the above advantages, the nine volume gas-liquid booster cylinder also has the following advantages:
材质优：
Excellent material:
产品采用台湾内电管油缸（光洁度好不生锈），45#钢法兰板，日本NOK进口气封及英国HALLIET进口油封等等匠心制造，确保产品品质。
The products are manufactured with ingenuity, such as electric tube oil cylinder in Taiwan (no rust in finish), high-quality 45# steel flange plate, gas seal imported from NOK in Japan and oil seal imported from halliet in Britain, so as to ensure the high-end quality of the products.
体型美：
Body beauty:
产品设计新颖，外形美观，获得十多项外观设计证书及实用新型证书。
The product has novel design and beautiful appearance, and has obtained more than ten design patent certificates and utility model patent certificates.
台湾技术：
Taiwan technology:
年台湾气液增压创新技术支持，产品技术成熟稳定。
In, Taiwan's gas-liquid pressurization innovation technology support, and the product technology is mature and stable.
2年质保：
2-year warranty:
产品享受2年厂家质保，终生技术支持。
The products enjoy 2-year manufacturer's free warranty and lifelong technical support.
口碑好：
Good reputation:
业内口碑好，在增压缸行业排名前二，在品质增压缸产品里，性价比高。
It has a good reputation in the industry and ranks the top two in the booster cylinder industry. In the high-end quality booster cylinder products, it has high cost performance.
Today's sharing is about the gas-liquid booster pump. More content will be shared here. Please continue to pay attention to us: http://www.sdjingtuo.com
