Safe operation of blasting test bench:
1. There are different blasting control modes for different users'requests for the use of the blasting test bench.
2. Blasting test bench can be operated under load for 5/min.
3. Before use, we should carefully check the boost installation and electrical system. It can be used without leakage or exposure.
4. When using, the four legs should be firmly supported in the solid air, and if necessary, the sleepers can be used to find the degree.
5. The movable door of the blasting test bench should be locked firmly before it can be operated.
6. The center of the load should be at the center of the working table as far as possible.
7. Blasting test bench has been inspected and tested before leaving the factory. Each technical index has reached the design request, and only the ground wire needs to be connected when it is used. There is no need to adjust the supercharger system and electrical system.
Characteristics of blasting test bench:
1. The structure of the blasting test bench is compact and stable, and it can operate continuously at high frequencies.
2. The rated load is serious, which can effectively improve the work efficiency.
3. Adopt professional system with low noise and long service life.
4. The range of optional parts of the blasting test bench is universal, which can meet the needs of customers in an all-round way.
5. Compact structure, simple appearance, sensitive maintenance and convenient use.
6. The blasting process of the blasting test bench is average and smooth.
7. Blasting stability, can meet the large pressure, large flow volume blasting, super high pressure pressurization system maintenance, ensure safe operation.
This article is organized and published by the gas booster pump. Do you know something about these contents? For more information, please click: http://www.sdjingtuo.com. We will have more wonderful content for you to see.