对于气液增压泵设备，很多人没有见过，但这种设备在我们的生活中很普遍。设备操作简单可靠，只要基本遵守操作规程和注意事项就不会有任何隐患。为了让更多人了解，先从问题说起，比如气液增压泵对气源的要求。
For gas-liquid booster pump equipment, many people have not seen it, but this type of equipment is very common in our daily lives. The equipment operation is simple and reliable, as long as the basic operating procedures and precautions are followed, there will be no hidden dangers. In order to make more people understand, let's start with the problem, such as the requirements for the air source of the gas-liquid booster pump.
一般来说，气动液体增压泵对气源的要求不高也不低。要求是过滤后干净干燥的压缩空气，4~7 kg，不能太大也不能太小。在使用气液增压泵产品时，为了保证气源能够满足这些要求，可以做以下处理，仅供参考：可以选择自动排水三点组合，达到更好的空气质量。如果气压不稳定，可以安装储气罐，实现更稳定的气源压力供应。定期检查气动三联油杯中的润滑油量是否充足。定期给予三点联合引流等。
Generally speaking, pneumatic liquid booster pumps have neither high nor low requirements for air sources. The requirement is clean and dry compressed air filtered, weighing 4-7 kg, which should not be too large or too small. When using gas-liquid booster pump products, in order to ensure that the air source can meet these requirements, the following treatment can be done for reference only: the automatic drainage three-point combination can be selected to achieve better air quality. If the air pressure is unstable, an air storage tank can be installed to achieve a more stable air supply pressure. Regularly check whether the lubricating oil in the pneumatic triple oil cup is sufficient. Regularly administer three point combined drainage treatment, etc.

如果气源不好（水蒸气、油气、灰尘等），产品长期使用后会对产品内部造成不必要的影响，降低综合使用寿命，这一点大家一定要注意。注意事项还有很多，如：使用前，建议在驱动气源入口处加装油水分离器，经常将水杯内的水放出；每次使用气液增压泵后，都要将相关气体排出；定期检查气体增压泵，以保持零件的完整性。
If the air source is not good (such as water vapor, oil gas, dust, etc.), long-term use of the product will cause unnecessary impact on the internal parts of the product, reducing its comprehensive service life. This is something that everyone must pay attention to. There are many precautions to note, such as: before use, it is recommended to install an oil water separator at the inlet of the driving air source, and frequently drain the water from the water cup; After each use of the gas-liquid booster pump, the relevant gas must be discharged; Regularly inspect the gas booster pump to maintain the integrity of the parts.
此外，还需要在使用前后进行检查和维护，防止设备故障。比如泵突然停止工作，这时候就要找原因。操作方法可以包括检查驱动气源是否打开，驱动压力是否符合要求；检查气缸盖气路是否畅通；检查换向阀的气路是否畅通；检查换向阀端的针孔是否已成为正常通孔；检查换向阀的高压室有无泄漏。
In addition, it is necessary to conduct inspections and maintenance before and after use to prevent equipment malfunctions. For example, if the pump suddenly stops working, it is necessary to find the cause. The operation method can include checking whether the driving air source is open and whether the driving pressure meets the requirements; Check if the air circuit of the cylinder head is smooth; Check if the air circuit of the directional valve is smooth; Check if the pinhole at the reversing valve end has become a normal through-hole; Check the high-pressure chamber of the directional valve for leaks.
气液增压泵对气源有什么要求？相关要求还是比较严格的，需要多加注意。
What are the requirements for air source for gas-liquid booster pumps? The relevant requirements are still quite strict and require more attention.