无油气体增压泵出现的原因是美国zui早生产出无油气体增压泵，主要有利于航空工业的发展和各种航空部件的测试。因为要求高，所以对测试源的要求严格。有关部门开发了许多测试源和方法，从而生产出气动增压泵及相关产品。
The reason for the emergence of oil-free gas booster pumps is that Zui in the United States produced oil-free gas booster pumps earlier, which is mainly beneficial for the development of the aviation industry and the testing of various aviation components. Due to the high requirements, the requirements for testing sources are very strict. The relevant departments have developed many testing sources and methods to produce pneumatic booster pumps and related products.
无油气体增压泵的工作原理：气动气体增压泵利用大面积活塞的低压气体（2-8bar）在小面积活塞上产生高压气体/液体。可用于压缩空气等气体，通过驱动气压可无级调节输出气压。
The working principle of an oil-free gas booster pump: The pneumatic gas booster pump utilizes low-pressure gas (2-8 bar) from a large area piston to generate high-pressure gas/liquid on a small area piston. It can be used for compressed air and other gases, and the output pressure can be steplessly adjusted by driving the pressure.
无油气体增压泵输出压力如何调节，输出压力和流量由驱动气体的调压阀jing确调节。调节驱动气压，使气压增压泵的输出压力在预增加的气压和较大的输出压力之间jing确调节。
How to adjust the output pressure of the oil-free gas booster pump, and the output pressure and flow rate are adjusted by the pressure regulating valve of the driving gas. Adjust the driving air pressure to ensure that the output pressure of the pneumatic booster pump is adjusted between the pre increased air pressure and the larger output pressure.

无油气体增压泵的诞生具有里程碑意义，标志着气体增压泵行业的重大技术创新和突破，解决了一些高科技行业无法使用油类增压泵进体增压的困境。这是气体增压泵历史上的重大突破。
The birth of oil-free gas booster pumps is of milestone significance, marking a major technological innovation and breakthrough in the gas booster pump industry, solving the dilemma of some high-tech industries being unable to use oil based booster pumps for gas pressurization. This is a major breakthrough in the history of gas booster pumps.
无油气动增压泵使用的原料不同：增压泵和气缸不一样，气缸只需要发力，增压泵还需要增压，各种原料在高压下的条件是不一样的。比如铝合金在高压下的摩擦，会使金属疲软，造成增压缸的变形和损坏。所有的增压缸都是304不锈钢材质，可以轻松避免这些问题。
The raw materials used in oil-free pneumatic booster pumps are different: booster pumps and cylinders are different. The cylinders only need to apply force, and booster pumps also need to boost pressure. The conditions of various raw materials under high pressure are different. For example, the friction of aluminum alloy under high pressure can weaken the metal, causing deformation and damage to the turbocharged cylinder. All turbocharged cylinders are made of 304 stainless steel material, which can easily avoid these problems.
技能方面；多数厂家采用单层缸体，导致增压介质温升较高，影响增压缸密封圈寿命。换向阀精度达不到，影响增压泵的升压速度。单向阀密封精度不好，影响缓压保压。
Skills; Most manufacturers use a single-layer cylinder body, which leads to a higher temperature rise of the boosting medium and affects the service life of the sealing ring of the boosting cylinder. The accuracy of the directional valve cannot be achieved, which affects the boosting speed of the booster pump. The sealing accuracy of the one-way valve is not good, which affects the pressure relief and maintenance.
加工设备的影响：知识性强，技术化，增压泵看起来简单，精度要求高。比如换向阀上的排气孔要用分针盘打孔，放置均匀，不影响换向和排气不均匀。换向阀室应采用高速精密雕刻，无毛刺和控制孔位置的尺寸和精度。
The impact of processing equipment: strong knowledge, specialized technology, simple appearance of booster pumps, high precision requirements. For example, the exhaust hole on the directional valve should be punched with a micrometer disc and placed evenly, without affecting the directional and exhaust unevenness. The directional valve chamber should adopt high-speed precision engraving, without burrs, and control the size and accuracy of the hole position.