气体增压泵使用久了之后，其里里外外都会有许多灰尘，这个时候就需要对气体增压泵进行清洗，那么在清洗气体增压泵时都需要注意哪些方面呢?
After the gas booster pump has been used for a long time, there will be a lot of dust inside and outside. At this time, it is necessary to clean the gas booster pump. So what should be paid attention to when cleaning the gas booster pump?
1、不能用煤油、酒精或是其它腐蚀性液体，以防液压器元件、油箱等部件受到腐蚀，影响液压器的正常使用。
1. Kerosene, alcohol or other corrosive liquids shall not be used to prevent the hydraulic components, oil tank and other components from being corroded and affecting the normal use of the hydraulic device.
2、清洗气体增压泵时，液压泵运转和清洗介质加热应同时进行。因为，清洗油液的温度为五十摄氏度到八十摄氏度时，系统内的橡胶渣时很容易被除掉的。
2. When cleaning the gas booster pump, the hydraulic pump operation and cleaning medium heating should be carried out simultaneously. Because when the temperature of the cleaning fluid is 50 ℃ to 80 ℃, the rubber residue in the system is easily removed.
3、液压泵工作的时候进行间歇性的运转可以提高清洗效果。
3. Intermittent operation of the hydraulic pump can improve the cleaning effect.
4、我们应该在气体增压泵的清洗油路的回路上安装过滤器，这样可以过滤掉系统内大部分的杂质。
4. We should install a filter on the cleaning oil circuit of the gas booster pump, so that most of the impurities in the system can be filtered.
5、清洗液压泵的时间一般在四十八小时到六十小时之间，这是由系统的复杂程度和污染程度等因素决定的。
5. The time for cleaning the hydraulic pump is generally between 48 hours and 60 hours, which is determined by the complexity of the system and the degree of pollution.
6、清洗结束时，不要立即使液压泵停止运转，应该使其持续运转直到液压泵气温恢复正常，这样可以防止外界湿气使内部器件生锈。
6. At the end of cleaning, do not stop the hydraulic pump immediately, but keep it running until the temperature of the hydraulic pump returns to normal, which can prevent external moisture from rusting the internal components.
7、清洗完气体增压泵后要及时把回路内的清洗油去除干净。
7. After cleaning the gas booster pump, clean the cleaning oil in the circuit in time.
In order to extend the service life of the gas booster pump, please pay attention to the above aspects when cleaning in the future. For more information about this device, please visit our website http://www.sdjingtuo.com Ask!
