热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题初次使用气液增压泵的用户

初次使用气液增压泵的用户要避免七个使用问题

发布时间:2022-12-26 15:25:46   发布人:http://www.sdjingtuo.com
对于初次使用气液增压泵的用户来说,遇到一些故障问题是很常见的。只要知道了气液增压泵故障的解决办法,解决起来就不难了。下面小编整理了七个方面的故障问题了解。
For users who first use gas-liquid booster pump, it is very common to encounter some problems. As long as we know the solution to the fault of the gas-liquid booster pump, it is not difficult to solve it. The following sections summarize the seven aspects of the problem.
故障一:气液增压泵工作频率过低。
Fault 1: The working frequency of the gas-liquid booster pump is too low.
解决方案:气液增压泵管路配置或接口较小,适当加大管路中的气元件或气管管径。
Solution: The pipeline configuration or interface of the gas-liquid booster pump is small, and the diameter of the gas element or gas pipe in the pipeline should be appropriately increased.
故障二:气液增压泵导向阻力过大。
Fault 2: The guide resistance of the gas-liquid booster pump is too large.
解决方案:重新调整气液增压泵机台安装的垂直度。
Solution: readjust the verticality of the installation of the gas-liquid booster pump.
故障三:气液增压泵提升力不够。
Fault 3: The lifting force of the gas-liquid booster pump is not enough.
解决方案:认真核算气液增压泵提升力重新订购气液增压缸产品
Solution: Carefully check the lifting force of the gas-liquid booster pump and reorder the gas-liquid booster cylinder
故障四:气液增压泵预压行程未走到位。
Fault 4: The preloading stroke of the gas-liquid booster pump is not in place.
解决方案:降低气液增压泵模具高度。
Solution: reduce the mold height of gas-liquid booster pump.
气液增压泵
故障五:气液增压泵出现提前增压。
Fault 5: The gas-liquid booster pump is pressurized in advance.
解决方案:重新设定气液增压泵动作时间。
Solution: reset the action time of gas-liquid booster pump.
故障六:气液增压泵模具弹簧力大于预压力。
Fault 6: The spring force of the gas-liquid booster pump mold is greater than the pre pressure.
解决方案:更换气液增压泵上的气液增压缸,加长增压行程。
Solution: Replace the gas-liquid booster cylinder on the gas-liquid booster pump to extend the booster stroke.
故障七:气液增压泵工作频率过快。
Fault 7: The working frequency of the gas-liquid booster pump is too fast.
解决方案:将气液增压泵工作频率控制在额定范围内。
Solution: Control the working frequency of gas-liquid booster pump within the rated range.
所以说初次使用气液增压泵的用户要避免七个使用问题,当然平日里使用记得及时对其进行维护保养。更多相关内容就来我们网站http://www.sdjingtuo.com进行咨询!
Therefore, users who use the gas-liquid booster pump for the first time should avoid seven problems. Of course, remember to maintain it in time when using it in ordinary days. More relevant content will come to our website http://www.sdjingtuo.com Consult!
新闻: