热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题气液增压泵是如何进行工作

气液增压泵是如何进行工作的?

发布时间:2022-10-12 11:53:43   发布人:http://www.sdjingtuo.com
现如今气液增压泵已广泛应用到各个行业,其特点众多,下面就为大家介绍下气液增压泵是如何进行工作的,以便让您作为参考更好更顺利的使用。
Now the gas-liquid booster pump has been widely used in various industries, with many characteristics. Now we will introduce how the gas-liquid booster pump works, so that you can use it better and smoothly as a reference.
气液增压泵以压缩空气做为动力的气动往泵,一款以液压油、水及乳化液为增压介质,利用大面积活塞的低气压产生小面积活塞的高液压。
The gas-liquid booster pump is a pneumatic pump driven by compressed air. It uses hydraulic oil, water and emulsion as the pressurizing medium, and uses the low pressure of large area pistons to generate high hydraulic pressure of small area pistons.
由单向阀控制的高压柱塞不断的将液体排出,增压泵的出口压力大小与空气驱动压力有关。当驱动部分和输出液体部分之间的压力达到平衡时,增压泵会停止运行,不再消耗空气。
The high-pressure plunger controlled by the check valve continuously discharges the liquid, and the outlet pressure of the booster pump is related to the air driving pressure. When the pressure between the drive part and the output liquid part reaches balance, the booster pump will stop running and no longer consume air.
当输出压力下降或空气驱动压力增加时,增压泵会自动启动运行,直到再次达到压力平衡后自动停止。
When the output pressure drops or the air drive pressure increases, the booster pump will automatically start and run until the pressure balance is reached again.
采用单气控非平衡气体分配阀来实现泵的自动往复运动,泵体气驱部分采用铝合金制造。接液部分根据介质不同选用碳钢或不锈钢,泵的全套密封件均为进口产品,从而保证了气液增压泵的性能。
The single air control non-equilibrium gas distribution valve is used to realize the automatic reciprocating motion of the pump, and the gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel shall be selected for the liquid connection part according to different media. The full set of seals of the pump are imported products, thus ensuring the performance of the gas-liquid booster pump.
气液增压泵
气体增压泵B系列为二级增压泵,可以将低压力的气体增很高的压力,驱动气压≤7bar,大可增640Mpa。
The gas booster pump B series is a two-stage booster pump, which can increase the low pressure gas to a very high pressure. The driving pressure is ≤ 7bar, which can be greatly increased to 640Mpa.
该系列泵的换向方式与G系列完全相同,与G系列相比,他能够在相同空气驱动压力下产生2倍的输出压力,整台泵全部采用铝合金及不锈钢制造。
The reversing mode of this series of pumps is the same as that of G series. Compared with G series, it can produce twice the output pressure under the same air driving pressure. The whole pump is made of aluminum alloy and stainless steel.
在泵的气驱部分该系列需用润滑型气体,以便让密封和其他内部零件得到润滑,该系列泵的驱动活塞直径为160mm。更多相关该设备的事项了解,您可以来我们网站http://www.sdjingtuo.com咨询!
In the gas drive part of the pump, lubricating gas is required for this series to lubricate the seals and other internal parts. The drive piston diameter of this series of pumps is 160mm. For more information about this device, you can visit our website http://www.sdjingtuo.com consulting service
新闻: