气体增压泵是一种活塞式泵，可以适用于各种无腐蚀性气体增压、保压。结合现场使用压力可以根据气体加压泵型号来选择气体加压泵。下面小编来讲讲气体增压泵的使用注意事项吧。
The gas booster pump is a piston pump, which can be used for pressurizing and maintaining various non corrosive gases. The gas booster pump can be selected according to the model of the gas booster pump in combination with the field pressure. Now let's talk about the precautions for the use of gas booster pump.
气体增压保压范围6-80MPa，一般用于局部压力不足，需要增高气体压力，往气瓶里增压罐装、充气、气密性试验检测。工作时，气体增压迅速往复工作，随着输出压力的增高，泵的往复速度减慢直止停止。此时，泵输出的压力恒定，能量消耗低，各部件停止运动，由于活塞式泵结构简单，故易于维护。
The range of gas pressurization and pressure maintaining is 6-80MPa, which is generally used to pressurize the cylinder for filling, inflation, and air tightness test if the gas pressure needs to be increased due to insufficient local pressure. When working, the gas pressurization works rapidly to and fro. With the increase of the output pressure, the reciprocating speed of the pump slows down until it stops. At this time, the output pressure of the pump is constant, the energy consumption is low, and all parts stop moving. Because of the simple structure of the piston pump, it is easy to maintain.
1、输出压力要相比自己要求的压力留有余量。
1. The output pressure should have margin compared with the pressure you require.
2、高压入口加装过滤器，有利于减少杂质等对产品的影响。
2. A filter is installed at the high-pressure inlet to reduce the impact of impurities on the product.
3、产品入口压力有着严格的要求，入口压力过低，直接影响该增压泵的流量及输出压力。
3. The inlet pressure of the product has strict requirements. If the inlet pressure is too low, the flow and output pressure of the booster pump will be directly affected.
4、驱动气压范围≤8bar，切勿超负荷使用。
4. Drive air pressure range ≤ 8bar, do not overload.
5、增压介质的洁净，该增压泵及现场使用环境的清洁、卫生。
5. The booster medium shall be clean, and the booster pump and the on-site service environment shall be clean and sanitary.
6、使用前，驱动气源口处建议加配油水分离器，经常释放水杯内部的水分。
6. Before use, it is recommended to add an oil-water separator at the drive air supply port to regularly release the water inside the water cup.
7、每次用完高压该增压泵后，需要把高压气体排净。
7. After using the high-pressure booster pump every time, the high-pressure gas needs to be discharged completely.
8、定期检查增压泵，保持零部件的完整性。
8. Regularly check the booster pump to maintain the integrity of parts.
Here are the precautions for using the gas booster pump. If you have any questions or needs, please come to our website at any time http://www.sdjingtuo.com Ask about it!
