气体增压泵利用压缩空气作为动力，不需要电源，无火花产生，适合煤矿、石油石化等需要防爆的场合。适用于大部分气体增压，可以对氩气、二氧化碳、天然气、氦气、氢气、乙烯和氮气增压。
The gas booster pump uses compressed air as power, without power supply and spark generation. It is suitable for explosion-proof occasions such as coal mine, petroleum and petrochemical industry. It is suitable for pressurization of most gases and can pressurize argon, carbon dioxide, natural gas, helium, hydrogen, ethylene and nitrogen.
自带冷却，无油润滑，气动活塞环及其他气动部件在工作状态时不需要添加润滑油，节省运行成本，防止油气污染。
Self cooling, oil-free lubrication, pneumatic piston rings and other pneumatic components do not need to add lubricating oil in working state, so as to save operation cost and prevent oil-gas pollution.
当达到设定输出压力，大小活塞达到里的平衡，增压泵停止工作，此时不再消耗能量，也没有任何热量产生，具有良好的压力保持特性。当有压力泄漏时，增压泵自动补充压力，频繁启动无任何影响。
When the set output pressure is reached, the balance between the large and small pistons is reached, and the booster pump stops working. At this time, no energy is consumed and no heat is generated. It has good pressure maintaining characteristics. When there is pressure leakage, the booster pump automatically replenishes pressure, and frequent startup has no impact.
在泵的压力范围内，调节调节阀从而调节进气压力，输出液压相应相应得到无极调整。无论何种原因造成保压回路压力下降，将自动启动，补充泄漏压力，保持回路压力恒定。
Within the pressure range of the pump, the regulating valve is adjusted to adjust the inlet pressure, and the output hydraulic pressure is adjusted accordingly. No matter what causes the pressure drop of the pressure maintaining circuit, it will start automatically to supplement the leakage pressure and keep the circuit pressure constant.
采用气体驱动，无电弧及火花，可在危险场所使用。与其他气驱泵相比，增压泵可完成相同的工作，但其零件及密封少，维护简单工作时增压泵迅速往复工作，随着输出压力的增高，泵的往复减慢直停止，此时泵的压力恒定，能量消耗，各部件停止运动。
It is driven by gas, without arc and spark, and can be used in dangerous places. Compared with other air driven pumps, the booster pump can complete the same work, but it has few parts and seals, and the maintenance is simple. During the work, the booster pump works back and forth rapidly. With the increase of output pressure, the reciprocating speed of the pump slows down until it stops. At this time, the pressure of the pump is constant, the energy consumption is the lowest, and all parts stop moving.
气体增压泵的典型应用：
Typical applications of gas booster pump:
1.管件，软管，阀门，压力容器，汽缸等提供静态和爆破测试
1. Provide static and burst tests for pipe fittings, hoses, valves, pressure vessels, cylinders, etc
2.航空航天附件维修后的静态、动态测试
2. Static and dynamic test of aerospace accessories after maintenance
3.阀门校定
3. Safety valve calibration
4.阀门及井口装置水中冒泡实验
4. Water bubbling test of valves and wellhead devices
5.气压调节器的检测
5. Detection of air pressure regulator
6.汽车制动系统测试
6. Automobile braking system test
7.通信电缆充气设备
7. Communication cable inflation equipment
8.飞机轮胎和液压蓄能器充氮气
8. The aircraft tire and hydraulic accumulator are charged with nitrogen
9.气体辅助注塑中高压氮气充气
9. High pressure nitrogen inflation in gas assisted injection molding
10.超纯气体的压缩（CO2超临萃取）
10. Compression of ultrapure gas (CO2 supercritical extraction)
11.高压气体系统和仪器的测试
11. Test of high pressure gas system and instrument
12.去矿化作用，如反渗透作用及脱盐作用
12. Demineralization, such as reverse osmosis and desalination
13.提供压力以测验或校准天然气元件
13. Provide pressure to test or calibrate natural gas components
14.记录井下流体深度声波设备的动力
14. Record the power of downhole fluid depth acoustic equipment
15.高压气体流形态研究
15. Study on high pressure gas flow pattern
16.地质标本破坏性测验
16. Destructive test of geological specimens
For more information, please visit our website www.sdjingtuo.com COM, solve your doubts and customize various types of equipment for you!
