很多人在选择购买气体增压泵的时候往往会挑选压力比较大的泵，然后在通过一些方式来把压力调小，以此来满足生产需求，但如果调整不好的话很容易就出现压力稳定性不好的问题，下面来讲讲相关内容吧。

　　When many people choose to buy gas booster pump, they often choose the pump with relatively large pressure, and then adjust the pressure in some ways to meet the production demand, but if the adjustment is not good, it is easy to appear the problem of bad pressure stability, let's talk about the relevant content.

　　气体增压泵稳定性和气源的压力是密切相关的。假如气源的压力不稳定，将会造成气体增压泵无法正常加工作业，气体增压泵的压力时大时小。所以想要气体增压泵压力稳定，稳定气源压力是必不可少的，可以通过给空压机加装储气罐等方式来稳定气源压力。

　　The stability of gas booster pump is closely related to the pressure of gas source. If the pressure of the gas source is unstable, it will cause the normal processing of the gas booster pump, and the pressure of the gas booster pump is large and small. Therefore, if you want to stabilize the pressure of the gas booster pump, it is essential to stabilize the pressure of the air source. You can stabilize the pressure of the air source by adding a storage tank to the air compressor.

　　那么如何合理操作气体增压泵呢？气体增压泵不得随意安装，须按照产品说明书中的安装方法进行安装，否则可能导致产品无法运转、漏油等；不可超载运行，须按相应气体增压泵的程序运行。动作顺序说明为预压动作-加压动作-加压释放-预压复位；另外，要定期检查产品的液压油位是否正常或液压油是否乳化变质，更换新的液压油以达到正常使用效果。

　　So how to operate the gas booster pump reasonably? The gas booster pump shall not be installed randomly, and shall be installed in accordance with the installation method in the product manual, otherwise it may lead to product failure, oil leakage, etc.; Cannot overload operation, must be in accordance with the corresponding gas booster pump procedures. The sequence of action is described as prepressure action - pressure action - pressure release - prepressure reset; In addition, it is necessary to regularly check whether the hydraulic oil level of the product is normal or whether the hydraulic oil is emulsified or deteriorated, and replace the new hydraulic oil to achieve the normal use effect.

　　气体增压泵系统中使用的液体介质（如液压油、油脂、工艺水）须密封，以防止其泄漏到外部环境中。须采取一切必要措施防止气体增压泵液体介质的扩散。尽可能确保很好的使用（通过减少消耗品，同时防止排放和浪费），应防止或完全防止使用有害物质（在技术上可行的情况下）。此外，应使用所需的设备，如托盘和过滤器，上述要求应包含在系统参数要求中。

　　The liquid medium used in the gas booster pump system (such as hydraulic oil, grease, process water) must be sealed to prevent its leakage to the external environment. All necessary measures must be taken to prevent the diffusion of the liquid medium of the gas booster pump. To ensure good use as far as possible (by reducing consumables while preventing emissions and waste), the use of hazardous substances should be prevented or completely prevented (where technically feasible). In addition, the required environmental protection equipment, such as trays and filters, should be used, and the above environmental protection requirements should be included in the system parameter requirements.

　　气体增压泵压力稳定性怎么样？只要能调整好压力的大小就能让其压力稳定性变得更好，还有讲解了正确的操作重要性，所以就需要操作人员来好好仔细的进行了解，更多内容可以来网站www.sdjingtuo.com看看。

　　Gas booster pump pressure stability? As long as you can adjust the size of the pressure can make the pressure stability become better, and explain the importance of correct operation, so it requires operators to carefully understand, more content can come to the website www.sdjingtuo.com.