很多客户反映说气体增压泵在用了一段时间之后，增压泵的气罐里总是会有水，以为是气罐有裂缝，从外面渗水进去，或是缸体内部损坏，直接漏水进到气罐内，但是气压又一直很稳定，机械设备运转时又没有问题.Many customers reported that after using the gas booster pump for a period of time, there will always be water in the gas tank of the booster pump. They think that there is a crack in the gas tank, water seeps in from the outside, or the cylinder is damaged, and water leaks directly into the gas tank, but the air pressure has been very stable, and there is no problem when the mechanical equipment is running. For this problem, ruituo Xiaobian will talk to you about what caused it.
First of all, the gas booster pump will not automatically generate gas. It is only a product developed to improve the gas pressure, so it must be driven by the external low-pressure gas equipment. The connection between the two must be connected through the pipeline. Due to various external conditions, the low-pressure gas equipment may have water during operation, and these water will enter the gas tank of the booster pump with the gas pipe, These moisture will enter the equipment with the input pipe. If you want to solve this problem, you must regularly check the front-end air supply equipment and clean it. The problem of moisture in the air tank can be completely solved.
Large air pressurization system: when the flow is driven at 0.6MPa, and the output pressure is twice that of the air compressor. If the input pressure in your workshop is 0.7MPa, the pressurized pressure can reach 1.4mpa (twice). When the pressurization multiple increases, the output pressure will be unstable. If you want to obtain sustained and stable air pressure, your suggestion is to add an air storage tank, In this way, you don't worry about the increase and decrease of gas pressure;
The difference between electric booster pump and pneumatic booster pump is that: one is driven by the air source of the compressor directly, which is more suitable for local pressurization in the factory; At the same time, it can also be used to detect products or drive a cylinder, etc. the electric booster must be powered on to drive it to pressurize the gas. This kind of booster is not suitable for factories, because it will increase a certain production cost;
Today is the wonderful content that Xiaobian brings to you. More wonderful content focuses on our website: gas booster pump http://www.sdjingtuo.com