网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题 - 气体增压泵在工厂使用要注

气体增压泵在工厂使用要注意哪些优势?

发布时间:2021-12-09 16:26:46   发布人:http://www.sdjingtuo.com
1,噪音低,体积小,低至60分贝。较电动静音压缩机来说静音也占有优势,且占地面积小。效率高。
1. Low noise, small size, as low as 60 dB. Compared with the electric mute compressor, mute also has advantages, and the floor area is small. efficient.
2,输出压力高,压力无极可调,通过调整驱动气压就可以调整输出压力,输出压力与驱动气压成倍数关系,待到输出压力与驱动气压成倍数关系,设备就自动停止,不在耗气,低于设定值压力,自动补充压力损耗。
2. The output pressure is high and the pressure is infinitely adjustable. The output pressure can be adjusted by adjusting the driving air pressure. The output pressure is in multiple relationship with the driving air pressure. When the output pressure is in multiple relationship with the driving air pressure, the equipment will automatically stop without gas consumption. If the pressure is lower than the set value, the pressure loss will be automatically supplemented.
3,安全、防爆、无火花。气动增压产品,没有电机驱动,无油润滑的构造,使其在煤矿及危险场合可以进行使用。
3. Safe, explosion-proof and spark free. Pneumatic pressurization products have no motor drive and oil-free lubrication structure, so that they can be used in coal mines and dangerous occasions.
4,节省成本,在某些方便可以避免购买大型电动压缩设备的成本。如工厂气压的某一个点需要的压力较高,可以采用菲恩特牌气体增压泵。
4. Cost saving. In some convenience, the cost of purchasing large electric compression equipment can be avoided. If the pressure required at a certain point of the factory air pressure is high, feiente brand gas booster pump can be used.
气液增压泵
需要注意哪些事项:
What should be noted:
1,确定自己的现场驱动气压与被增压介质的入口压力。
1. Determine your own on-site driving air pressure and the inlet pressure of the pressurized medium.
2,了解自己所需的使用压力、及工装的常用压力。
2. Understand the maximum use pressure required by yourself and the common pressure of tooling.
3,另外对自己现场使用的工况也要有一个明确的认识,比如说流量的需求。往往流量是一个气体增压能否被客户使用的一个重要因素。
3. In addition, you should have a clear understanding of the working conditions used on site, such as the demand for flow. Often, flow is an important factor whether a gas pressurization can be used by customers.
新闻推荐:
气液增压泵如何增加压力工作? 2022-01-11
新买的增压泵为啥呢么需要一直加压? 2021-12-30
气体增压泵是如何保证自己的生产进度的? 2021-12-16
气体增压泵在工厂使用要注意哪些优势? 2021-12-09
气体增压泵空气增压泵可以使用多长时间? 2021-11-30
气液增压泵施工步骤是先怎么操作? 2021-11-18
气液增压机的上模安装要注意什么? 2021-11-10
气体增压泵与气液增压泵的区别! 2021-10-20
为什么气体增压泵经常突然不工作了? 2021-10-13
气体增压设备一般的组成部分是? 2021-10-06

13188935873

qq