热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题气动液体增压泵的应用特点

气动液体增压泵的应用特点有哪些?

发布时间:2021-01-14 17:49:32   发布人:http://www.sdjingtuo.com
1.输出压力高:液泵zui大可达640MPa,气泵zui大可200MPa2.使用范围广:工作介质可为液压油.水及大部分化学腐蚀性液体,而且可靠性高,免维护寿命长。
1. High output pressure: the liquid pump Zui can reach 640mpa, and the air pump Zui can reach 200MPa. 2. Wide range of application: the working medium can be hydraulic oil, water and most of the chemical corrosive liquid, with high reliability and long maintenance free life.
3.输出流量范围广:对所有型号泵仅需较小驱动气压就能平稳工作,此时获得较小流量,调节驱动进气量后可获得不同流量。
3. Wide range of output flow: for all types of pumps, only a small driving air pressure is needed to work smoothly. At this time, a small flow can be obtained, and different flows can be obtained after adjusting the driving air intake.
4.应用灵活:选用不同型号的泵,可获得不同的压力区域。
4. Flexible application: different types of pumps can obtain different pressure areas.
5.易于调节:在泵的压力范围内,调节调节阀从而调节进气压力,输出液压相应相应得到无极调整。
5. Easy to adjust: within the pressure range of the pump, adjust the regulating valve to adjust the inlet pressure, and the output hydraulic pressure can be adjusted infinitely.
气液增压泵
6.自动保压:无论何种原因造成保压回路压力下降,将自动启动,补充泄漏压力,保持回路压力恒定。
6. Automatic pressure maintaining: no matter what causes the pressure drop of pressure maintaining circuit, it will start automatically to supplement the leakage pressure and keep the circuit pressure constant.
7.操作:采用气体驱动,无电弧及火花,可在危险场所使用。
7. Operation safety: gas driven, no arc and spark, can be used in dangerous places.
4特点及应用1.多种气体驱动:压缩空气.氮气.水蒸汽.天然气等均可做作为泵的驱动气源。
Features and Applications 1. A variety of gas drive: compressed air, nitrogen, steam, natural gas, etc. can be used as the driving gas source of the pump.
2.使用范围广:工业领域用于机床卡盘的卡紧,蓄能器充气,高压瓶充气,降低压气体转换成高压气体等。凡是气源压力不够高,无论是机械或测试装置,均可采用增压泵。
2. Wide range of application: in the industrial field, it is used for clamping the chuck of machine tool, charging the accumulator, charging the high-pressure bottle, converting the reduced pressure gas into high-pressure gas, etc. Where the air pressure is not high enough, whether it is mechanical or test device, can use booster pump.
3.自动保压:无论何种原因造成保压回路压力下降,增压泵将自动启动,补充泄漏压力,保持回路压力恒定。
3. Automatic pressure maintaining: no matter what causes the pressure drop in the pressure maintaining circuit, the booster pump will start automatically to supplement the leakage pressure and keep the circuit pressure constant.
4.操作:采用气体驱动,无电弧及火花,完全用于有易燃、易爆的液体或气体场所。
4. Operation safety: gas driven, no arc and spark, completely used in flammable and explosive liquid or gas places.
5.维护简单:与其他气驱泵相比,增压泵可完成相同的工作,但其零件及密封少,维护简单6.性价比高:增压泵是一种柱塞泵,工作时增压泵迅速往复工作,随着输出压力的增高,泵的往复减慢直停止,此时泵的压力恒定,能量消耗zui低,各部件停止运动。
5. Simple maintenance: compared with other gas drive pumps, booster pump can complete the same work, but its parts and seals are less, and the maintenance is simple. 6. High cost performance: booster pump is a kind of plunger pump. When it works, booster pump reciprocates rapidly. With the increase of output pressure, the reciprocation of pump slows down until it stops. At this time, the pressure of pump is constant, the energy consumption is low, and all parts stop moving.
新闻: