热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题蒸汽增压泵的使用特点及用

蒸汽增压泵的使用特点及用途介绍

发布时间:2020-07-27 15:58:47   发布人:http://www.sdjingtuo.com
1、蒸汽增压泵可以将极低压力的气体增很高的压力,驱动气压≤7bar,气体输入口的压力范围为0.5—10bar,大可增90Mpa。整台泵全部采用铝合金及不锈钢制造,高可以承受200度的高温。
1. The steam booster pump can increase the gas with extremely low pressure to very high pressure, the driving pressure is less than 7 bar, and the pressure range of gas input port is 0.5-10 bar, which can be increased to 90 MPa. The whole pump is made of aluminum alloy and stainless steel, which can withstand 200 ℃ high temperature.
2、蒸汽增压泵系列为单级增压泵,为达到所需压力气体输入口输入气压需要一定程度的预压,预增压力因达到气体增压泵图片的大压力不同而不同。两端泵头均带有排气冷却,出厂时两入口及两出口可按用户要求连接好管路。
2. The steam booster pump series is a single-stage booster pump. In order to achieve the required pressure, the input air pressure at the gas inlet needs a certain degree of preloading. The pre boosting pressure varies with the large pressure in the picture of the gas booster pump. Both ends of the pump head are equipped with exhaust cooling, two inlet and two outlet can be connected according to user requirements.
3、蒸汽增压泵系列采用单气控非平衡气体分配阀来实现泵的往复运动,全部采用铝合金及不锈钢制造。全部密封均为进口产品,大设计驱动气压均为10bar,为了保证泵的寿命建议驱动气压<8bar。该系列泵的驱动活塞直径为160mm,为单作用泵,单作用泵均带有排气冷却。
3. The steam booster pump series adopts single gas control non-equilibrium gas distribution valve to realize the reciprocating movement of the pump, all made of aluminum alloy and stainless steel. All seals are imported products, and the driving air pressure is 10bar in large design. In order to ensure the service life of the pump, it is recommended that the driving air pressure be less than 8bar. The driving piston diameter of the series pump is 160mm, which is a single acting pump. The single acting pump is equipped with exhaust cooling.
气液增压泵
蒸汽增压泵的特点:Features of steam booster pump:
1、多种气体驱动:压缩空气.氮气.水蒸汽.等均可做作为泵的驱动气源,用大面积推小面积来实现蒸汽的增压。
1. A variety of gas drive: compressed air, nitrogen, steam, etc. can be used as the driving gas source of the pump, with large area push small area to achieve steam pressurization.
2、使用范围广:工业领域用于机床卡盘的卡紧,蓄能器充气,高压瓶充气,降低压气体转换成高压气体等。凡是气源压力不够高,无论是机械或测试装置,均可采用德科增压泵。
2. Wide range of application: it is used for clamping machine tool chuck, charging accumulator, high pressure bottle, reducing pressure gas into high pressure gas, etc. Any air source pressure is not high enough, whether it is mechanical or testing equipment, can use Delco booster pump.
3、自动保压:无论何种原因造成保压回路压力下降,增压泵将自动启动,补充泄漏压力,保持回路压力恒定。
3. Automatic pressure maintaining: no matter what causes the pressure drop of the pressure maintaining circuit, the booster pump will start automatically to supplement the leakage pressure and keep the circuit pressure constant.
4、蒸汽增压泵操作:采用气体驱动,无电弧及火花,完全用于有易燃、易爆的液体或气体场所。
4. Safe operation of steam booster pump: gas driven, no arc and spark, completely used in flammable, explosive liquid or gas places.
5、蒸汽增压泵维护简单:与其他气驱泵相比,增压泵可完成相同的工作,但其零件及密封少,维护简单。
5. Simple maintenance of steam booster pump: compared with other gas drive pumps, booster pump can complete the same work, but its parts and seals are less, and the maintenance is simple.
6、蒸汽增压泵:增压泵是一种柱塞泵,工作时增压泵迅速往复工作,随着输出压力的增高,泵的往复减慢直停止,此时泵的压力恒定,能量消耗低,各部件停止运动。
6. Steam booster pump: booster pump is a kind of plunger pump. When working, the booster pump works rapidly to and fro. With the increase of output pressure, the reciprocating of the pump slows down until it stops. At this time, the pressure of the pump is constant, the energy consumption is low, and all parts stop moving.
新闻: