A.泵不工作
A. Pump does not work
1. 检查驱动气源是否打开,驱动压力是否符合要求
1. Check whether the driving air source is open and whether the driving pressure meets the requirements
2. 检查气缸盖气路是否畅通
2. Check whether the air circuit of cylinder head is smooth
3.检查换向阀通风道是否畅通
3. Check whether the air passage of reversing valve is smooth
B.泵的动作突然加速,驱动活塞不停止反转
B. The action of the pump accelerates suddenly, and the driving piston does not stop reversing
1. 检查换向阀末端的冲击针孔是否已成为正常孔
1. Check whether the impact pinhole at the end of the reversing valve has become a normal hole
2. 检查换向阀高压室是否漏水
2. Check whether the high-pressure chamber of reversing valve leaks water
3.检查控制管有无泄漏
3. Check the control pipe for leakage
c、泵作用缓慢
c. Slow action of pump
1. 检查驱动气路是否堵塞
1. Check whether the driving air circuit is blocked
2. 检查控制气路是否堵塞
2. Check whether the control air circuit is blocked
3.检查驱动活塞的密封是否堵塞
3. Check whether the seal of driving piston is blocked
D.达到设定压力或保持压力一段时间后,泵不停止工作
D. After reaching the set pressure or holding the pressure for a period of time, the pump does not stop working
1. 检查控制气路是否泄漏,主要检查点火针和换向阀阀芯的密封
1. Check whether the control air circuit leaks, mainly check the sealing of the ignition pin and the valve element of the reversing valve
2. 检查出口单向阀密封是否损坏
2. Check whether the seal of outlet check valve is damaged
3.检查高压液体密封是否损坏
3. Check whether the high-pressure liquid seal is damaged
E.泵不上压
E. Pump is not pressurized
1. 进口单向阀密封泄漏
1. Seal leakage of inlet check valve
2. 高压液体密封损坏,将液体从消声器中喷出。
2. The high-pressure liquid seal is damaged, and the liquid is ejected from the muffler.
以上是
气液增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.com
The above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com