网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题 - 订购气动液体增压泵的常识

订购气动液体增压泵的常识您了解多少?

发布时间:2019-12-30 19:30:19   发布人:http://www.sdjingtuo.com
  如何订购气动液体增压泵
  How to order pneumatic hydraulic booster pump为了使您订购的液压泵处于工作状态,您必须了解以下参数:
  In order for the hydraulic pump you ordered to be in the best working condition, you must know the following parameters:
  1. 驱动气体的压力和流量
  1. Pressure and flow of driving gas
  所有的泵和动力装置在连续运行时使用高达0.69mpa的驱动压力,在间歇运行时使用高达1.03mpa的驱动压力。请参阅所需的驱动气体流量计,以便消耗性能的气动泵。
  All pumps and power units use up to 0.69mpa driving pressure in continuous operation and up to 1.03mpa driving pressure in intermittent operation. Refer to the required drive gas flow meter in order to consume the best performance pneumatic pump.
气液增压泵
  2. 工作压力和流量
  2. Working pressure and flow
  各泵及动力单元的工作压力是指泵在驱动压力为0.48Mpa时的泵输出压力和流量。如果泵的输出压力大于要求的工作压力,则应考虑安全措施。输出压力参照产品目录中的“静态驱动气压与输出液压近似比表”。动力装置的选择与泵的选择是一致的。关于工作流量,请参考产品目录中的“性能曲线”。
  The working pressure of each pump and power unit refers to the pump output pressure and flow when the driving pressure is 0.48mpa. If the maximum output pressure of the pump is greater than the required working pressure, safety measures shall be considered. The maximum output pressure refers to "table of approximate ratio of static driving air pressure to output hydraulic pressure" in the product catalog. The selection of power unit is consistent with that of pump. Refer to the performance curve in the product catalog for work flow.
  3.液体介质输送
  3. Liquid medium transportation
  泵输送的液体介质是选择泵时要考虑的重要因素。液压部分和液压密封圈的材料由液体介质决定。泵可以是油、水和大多数液体介质。标准泵的主要液压密封为丁二烯橡胶和聚氨酯,单向阀座采用特氟龙密封。其他密封材料有氟碳和乙丙烯,主要用于特殊的运输介质。请咨询工厂或当地经销商选择密封材料。
  The liquid medium delivered by the pump is an important factor to consider when selecting the pump. The material of the hydraulic part and the hydraulic seal ring is determined by the liquid medium. Pumps can be oil, water and most liquid media. The main hydraulic seal of standard pump is butadiene rubber and polyurethane, and one-way valve seat is teflon seal. Other sealing materials are fluorocarbon and ethylene propylene, which are mainly used for special transportation medium. Consult factory or local dealer to select sealing material.
  4. 可接受的体积和重量
  4. Acceptable volume and weight
  对于某些应用,泵和动力装置的尺寸和重量也应加以考虑。
  For some applications, the size and weight of pumps and power units should also be considered.
  以上是气液增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.comThe above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com

13188935873

qq