Air booster pump, also known as gas pressure valve, is a small area of piston end high-pressure fluid driven by a large area of low-pressure gas at the piston end. It can be used for compressed air and other gases. The output pressure can be driven by stepless pressure regulation. Applicable to the original air pressure system, improve the working environment pressure.

　　致密气增压泵是活塞泵空气作为电源,当进口压力气动阀阀心往复式切换操作,操纵升压泵活塞往复运动以极快的速度,增加输出压力,活塞往复速度减缓并终停止,目前,升压泵输出压力稳定,能耗低,部分停止操作;无论什么原因造成挡圈压降，增压泵都会自动启动，补充泄漏压力，保持回路压力稳定。泵体采用铝合金及不锈钢制造，密封部分采用进口，大驱动压力为8bar。

　　The dense gas booster pump uses piston pump air as the power supply. When the inlet pressure pneumatic valve core is reciprocally switched, the reciprocating movement of the booster pump piston is manipulated to increase the output pressure at a very fast speed. The reciprocating speed of the piston slows down and finally stops. At present, the output pressure of the booster pump is stable, the energy consumption is the lowest, and part of the booster pump stops operation. No matter what causes the pressure drop of the retaining ring, the booster pump will start automatically. Supplement the leakage pressure and keep the loop pressure stable. The pump body is made of aluminum alloy and stainless steel, the seal part is imported, and the maximum driving pressure is 8 bar.

　　气体增压泵分为气动增压泵和电动增压泵。

　　Gas booster pump is divided into pneumatic booster pump and electric booster pump.

　　增压泵密封无泄漏。无火花可用于可燃气体。不建议将氧气加压到20MPa。

　　The booster pump is sealed without leakage. Non sparking safety can be used for combustible gases. It is not recommended to pressurize the oxygen to 20MPa.

　　电动增压泵将通过过滤器轻微的空气。

　　Electric booster pumps will pass through filters with slight air.

　　电流的流量。气动流量小的工厂环境选择。

　　Current flow. Selection of plant environment with low pneumatic flow rate.

　　以上是气体增压泵厂家为大家介绍的相关内容，本文来源：http://www.sdjingtuo.comAbove is the related content introduced by the manufacturer of gas booster pump. The source of this article is http://www.sdjingtuo.com.