网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

常见问题

当前位置:首页 - 新闻中心 - 常见问题 - 压缩机增压泵的实际应用的

压缩机增压泵的实际应用的详细描述

发布时间:2019-02-27 13:30:18   发布人:http://www.sdjingtuo.com
1、产品描述
1. Product Description
2、本产品采用独特的高压部分的设计,其中高压压力腔采用不锈钢材质加工而成,内置配备车式密封圈以及支撑环,整体结构无焊接,均为螺纹连接式,结构简单,安装部位紧凑,重量较轻.
2. The product adopts the unique design of high-pressure part, in which the high-pressure chamber is made of stainless steel, and is equipped with car-type sealing ring and supporting ring. The whole structure is non-welded, all of them are threaded connection type. The structure is simple, the installation position is compact and the weight is light.
3、压缩空气在线增压泵可根据不同的条件,可分别选择不同的型号的增压泵与之相搭配.
3. Compressed Air online booster pumps can be matched with different types of booster pumps according to different conditions.
4、内部密封圈设计(压缩空气增压泵密封圈为组合密封圈,主要用于机械部件在静态条件下防止液体和气体介质的泄露.)
4. Internal seal ring design (Fienth compressed air booster pump seal ring is a combination seal ring, mainly used for mechanical components in static conditions to prevent leakage of liquid and gas media.)
5、压缩空气增压泵的参数:
5. The parameters of compressed air booster pump:
压力范围1-150MPa(可选
Pressure range 1-150 MPa (optional)
检测介质:空气
Detection medium: air
驱动空气压力值:2-8Bar
Driving air pressure: 2-8Bar
增压压力:根据不同的型号可以选择不通的产品。
Supercharging pressure: According to different models, you can choose products that are not feasible.
连接方式:螺纹式
Connection mode: threaded
6、压缩空气增压泵特点
6. Characteristic of Compressed Air Booster Pump
多种气体驱动:压缩空气、液化氮气和管道氮气、水蒸气。
气体增压泵
Various gas drive: compressed air, liquefied nitrogen and pipeline nitrogen, water vapor.
输出流量大:只需0.3-0.8MPa压缩空气驱动就可获得较大的输出流量。高输出压力为150MPa。
Large output flow: Only 0.3-0.8 MPa compressed air drive can achieve a larger output flow. The maximum output pressure is 150 MPa.
自动保压:工作时,迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时消耗能量很小,无热量产生,无零件运动。当压力平衡打破后,气动增压泵自动开始工作到下一个平衡。
Automatic Pressure Maintenance: When working, work quickly and reciprocating. As the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time, energy consumption is very small, no heat generation, no movement of parts. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance.
材质优良:高压部分材质为不锈钢。高压柱塞材质为不锈钢,并采用双层密封。 维护简单:台州菲恩特气动增压泵的零件及密封少。
Excellent material: The high-pressure part is made of stainless steel. The material of high pressure plunger is stainless steel, and double-layer seal is adopted. Maintenance is simple: Taizhou Fienth pneumatic booster pump has fewer parts and seals.
维护简单且成本低。相同系列泵的所有"O"型圈,维修包易损部件可相互替换,大大降低了维修成本。气动增压泵出厂前已加注润滑剂,工作时无需外部润滑。保持液压无须消耗能量
Maintenance is simple and low cost. For all O-rings of the same series of pumps, the vulnerable parts of the repair kit can be replaced with each other, which greatly reduces the maintenance cost. The pneumatic booster pump has been injected with lubricant before leaving the factory, so it does not need external lubrication when working. Keeping Hydraulic Pressure Free of Energy Consumption
具有防爆功能无需电力或电线连接 自身安全 结构小巧,重量轻,不受天气变化影响 易实现自动控制 抗污染
With explosion-proof function, it is easy to realize automatic control and anti-pollution without electric power or wire connection. It has compact safety structure, light weight and is not affected by weather change.
输出静态压力由驱动气压来调节
The output static pressure is regulated by the driving pressure.
输出压力达20000PSI的压力
Output pressure up to 20000PSI
在满负载时非常容易进行启动、停止操作.
It is very easy to start and stop at full load.
易安装,操作
Easy to install and operate

13188935873

qq