The role of the air booster valve is the air input, the air booster valve can output multiple high pressure gas, can reach two or five times the high pressure gas. And the air booster valve does not need power supply, installation and movement are very convenient. The output pressure and drive can be manually adjusted. The operation is simple and the practicability is very strong. Below is air.
Matters needing attention in use of booster valve.
1. Correct selection: Air booster valve can pressurize air, nitrogen, oxygen, hydrogen and other gases. If corrosive gases, such as H2S, SO2, etc., customers should take the initiative to explain the required pressure and flow rate in the selection.
2. Filtering requirements: the power source of the air booster valve is compressed air, and the gas source is clean. The particles are less than 5um. Generally, the gas source of the factory is dirty. If the pump is not filtered directly to the valve, long-term use, the pump will accumulate dirt, which will lead to one-way valve failure and serious wear and tear of the sealing ring.
3. Installation requirements: the best use of PU air source installation, easy to install, easy to operate, pipe will not rust, if the use of metal pipes, preferably with compressed air before installation, to avoid welding slag blowing into the reversing valve, the reversing valve stuck.
* low pressure gas and liquid can be converted to 2 times or 5 times of high-pressure gas.
* maximum flow up to 1350 litres /min; maximum pressure output can reach 40MPa.
* both drive and output pressure can be adjusted.
* no power supply, installation, easy to move.
This article is provided by the gas booster pump for you, our website is: http://www.sdjingtuo.com, we will be wholeheartedly enthusiasm to provide you with better service, welcome your visit!