热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯气体增压泵的维修与保养

气体增压泵的维修与保养

发布时间:2017-04-17 13:59:02   发布人:http://www.sdjingtuo.com
  1、安装:安装过程中,要避免杂物进入出口,保持出口清洁。
1, the installation: the installation process, to avoid clutter into export, export keep clean.
  2、驱动气体:请使用清洁的气源,以保证泵能持续稳定的工作,驱动气体要求颗粒<5um,建议在泵的驱动口加配二连体,泵在装配时,所有运动部分已经抹有适量润滑油,一般不再需要润滑,如长期使用干燥的压缩气体驱动,建议在二连体的油杯内加入适量的润滑油,进行油雾润滑。
2, drive gas: please use the clean air, to ensure that the pump can work steadily, driven gas requirements & lt; 5 um, it is suggested that in the pump drive plus with two conjoined, when pump assembly, all moving parts have to have a moderate amount of lubricating oil, generally no longer need lubrication, such as dry compressed gas drive, the long-term use of proposal in two conjoined to join the right amount of lubricating oil in the oil cup, oil mist lubrication.
  3、连接管路:根据泵的输出压力,请选择合适的出口连接管路,确保承受泵的较大输出压力。
3, connecting line: according to the output pressure of the pump, please choose the appropriate outlet connection pipe, to ensure the maximum output of the pump under pressure.

  4、气体增压泵入口压力:入口压力越大,流量也随之增大,单级增压泵,需要一定的预压才能达到理论较大输出压力。
4, gas booster pump inlet pressure, inlet pressure, the greater the flow rate is getting higher, single-stage booster pump, need certain preloading can achieve theoretical maximum pressure.
  5、启动:该泵的小驱动压力为1.5-2bar,可通过调整二连体调压阀调节驱动气体的压力,以达到你所需要的压力。
5, startup: the smallest drive of the pump pressure is 1.5-2 bar, can be adjusted through the two conjoined pressure regulating valve to adjust driving gas pressure, the pressure that you need in order to achieve.
  6、接口尺寸很重要:请确认所安装的螺钉和管是否适合泵的范围,为保证液泵能获得理想的流量和压力,不能减少泵的尺寸。
6, the size of the interface is very important: please make sure the installed screws and tube is appropriate for the scope of the pump in order to ensure the pump can achieve the desired flow rate and pressure, does not reduce the size of the pump.
  我们一直以质量一,顾客上,作为我们的服务宗旨,尽我们较大的努力来为您提供满意的服务,我们真诚的欢迎您来本公司视察,选购,希望我们有良好的合作机会,共同创造双赢的局面!
We have been to the quality first, customer first, as our service tenet, do our best to provide you with satisfactory service, we sincerely welcome you to our company visit, the choose and buy, hope we have good cooperation opportunity, together create a win-win situation!
新闻: