热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯气液增压泵的使用过程以及

气液增压泵的使用过程以及优势

发布时间:2022-10-10 15:49:28   发布人:http://www.sdjingtuo.com
气液增压泵是以压缩空气为动力的一种泵,基于面积差原理,液压油按固定增压比连续输出,并用来驱动液压执行器工作,气液泵自动循环工作。气液增压泵的使用过程以及优势是怎样的呢?小编为您讲解下。
The gas-liquid booster pump is a pump driven by compressed air. Based on the area difference principle, the hydraulic oil is continuously output at a fixed pressure ratio and used to drive the hydraulic actuator to work. The gas-liquid pump works automatically. What is the use process and advantages of gas-liquid booster pump? I'll explain it to you.
在接通初期,气液增压泵作为普通液体输送泵,此时循环速度快,输出液体流量大。随着输出压力在逐渐提高,活塞承受的阻力也越来越大,泵的循环速度也就越来越慢。
At the initial stage of connection, the gas-liquid booster pump is used as a common liquid delivery pump. At this time, the circulation speed is fast and the output liquid flow is large. With the gradual increase of the output pressure, the resistance that the piston bears becomes greater and greater, and the circulation speed of the pump becomes slower and slower.
当输出压力的反作用力与气动驱动力达到平衡时,泵将自动停下来。这时泵处于保压状态,不消耗任何的能量。
When the reaction force of output pressure is balanced with the pneumatic driving force, the pump will stop automatically. At this time, the pump is in a pressure maintaining state and does not consume any energy.
当因泄露或其他原因引起输出压力的下降,或提供的气源压力升高时,泵会立即自动启动,调整压力,这些都得益于泵自身较低的摩擦阻力,保证了输出压力的可靠性。
When the output pressure drops or the air supply pressure increases due to leakage or other reasons, the pump will automatically start immediately to adjust the pressure, which is due to the low friction resistance of the pump itself, ensuring the reliability of the output pressure.
气液增压泵的优势:
Advantages of gas-liquid booster pump:
1.达到压力值后,泵自动停止运行,没有噪音,不消耗能源,更为。
1. After reaching the pressure value, the pump automatically stops running, without noise, energy consumption and environmental protection.
2.没有工作介质温升现象。
2. There is no temperature rise of working medium.
3.不需要电源,适合无电源或防爆场合。
3. No power supply is required, and it is suitable for occasions without power supply or explosion-proof.
4.体积小易携带配置灵活,可自带油箱,也可远端供油,节省安装空间。
4. Small size, easy to carry, flexible configuration, with its own oil tank or remote oil supply, saving installation space.
气液增压泵
5.输出压力可达上百兆帕。
5. The output pressure can reach hundreds of MPa.
6.压力没有冲击,更,对设备和零件没有损伤。
6. The pressure has no impact, is safer, and has no damage to equipment and parts.
7.气压驱动不需额外的在线润滑管路,既节约了运行成本又避免了油雾对环境的污染以及人体的伤害。
7. The pneumatic drive does not need additional online lubrication pipeline, which not only saves the operating cost but also avoids the pollution of oil mist to the environment and human body.
8.便于维护,泵体采用螺纹连接,所有易损件均为标准件,方便安装及拆卸。换向阀外置,便于维修更换,并且寿命更长。
8. It is convenient for maintenance. The pump body adopts threaded connection. All wearing parts are standard parts, which are convenient for installation and disassembly. The reversing valve is externally arranged, which is convenient for maintenance and replacement and has a longer service life.
9.频繁的启动、停止对泵无任何不良影响。
9. Frequent starting and stopping have no adverse effect on the pump.
10.预留密封泄漏溢流孔,在保护泵体同时,亦可及时发现泵的故障。
10. The seal leakage overflow hole is reserved to protect the pump body and find the pump fault in time.
11.在泵的压力范围内,通过调节输入气压,输出液体压力即可得到相应调整。
11. Within the pressure range of the pump, the output liquid pressure can be adjusted by adjusting the input air pressure.
12.根据客户需求,从简单的手动操作到全自动控制均可定制。
12. According to customer requirements, it can be customized from simple manual operation to full automatic control.
13.增压介质多样,水、油、冷却液、润滑油以及腐蚀性流体均可使用。
13. The pressurizing medium is diverse, and water, oil, coolant, lubricating oil and corrosive fluid can be used.
气液增压泵的使用过程以及优势就讲解到这里了,您对此有什么想法或者问题就来我们网站http://www.sdjingtuo.com咨询吧!
The use process and advantages of the gas-liquid booster pump are explained here. If you have any ideas or questions, please come to our website http://www.sdjingtuo.com Consult!
新闻: