1：厂家的运用机械要素，就拿出产机械来说有高精机床和一般机床，高精机床出产的配件由于精度高，不易呈现因配件的质量而影响气体增压泵运用，一般机床出产的配件由于精度达不到要求，会使增压泵经常呈现各种小毛病。高精机床的运用就比一般机床高出3-4倍相同也会影响增压泵的。
1: Generally speaking, due to the high precision of the machine tool, the high precision of the machine tool is often affected by the high precision of the machine tool. The price of high-precision machine tool is 3-4 times higher than that of general machine tool, and the same will affect the price of booster pump.
2：增压泵的巨细和原料要素，气体增压泵相同增压比的增压泵比其它的增压泵要大不少，气体增压泵和空气增压泵巨细影响增压后的流量和运用寿命，(如ZTA05气体增压泵现在是市面上相同增压比流量的1.2-1.5倍，由于流量大了相应的增压泵在相同运用情况下比其它增压泵运作要减少许多，可以做到减排，添加运用寿命等优点)。原料这个应该不用多说了，就是一分价钱一分货，(比方ZTA05高压封选用的是国外进口的混合封。丁晴橡胶，铁氟龙和其它几种原料混合而成有耐磨耐高温运用使命长等特色，相同是国内的10以上，运用好的资料客户不会吃亏的，当时收购时是高了，但是后续运用和修理就会节省许多)。
2: The size and raw material elements of booster pump: the booster pump with the same boost ratio of gas booster pump is much larger than that of other brands of booster pump. The size of gas booster pump and air booster pump affects the flow rate and service life after pressurization. (for example, zta05 gas booster pump is 1.2-1.5 times of the flow rate of the same pressure increase ratio on the market, because of the large flow rate, the corresponding booster pump in the same application situation is more than Other booster pump operation to reduce a lot, can achieve energy saving emission reduction, add service life and other advantages. The raw materials should not be said much, that is, the price of each part of the goods. (for example, zta05 high pressure seal is imported from abroad. It is made of NBR, Teflon and other raw materials. It has the characteristics of wear resistance, high temperature resistance and long application mission. The same price is more than 10% in China. Customers will not suffer from the good data. The price was high at the time of purchase, but the subsequent use and repair will save a lot of money).
3：厂家技能要素，现在市面上呈现许多小厂家因技能的不完善导致许多气体增压泵耗能高，功率低增压不成比例等严重影响运用方的功率，厂家就结合德国技能和国内行情在周总工程师的带领下研制出国内现在消耗更小的增压泵，(如换向阀套，选用黄金比例的阀芯在换向时操控气体的进气量和往复频率来达到减排作用和延长运用寿命)。
3: The skill elements of manufacturers are now on the market. Due to the imperfect skills of many small manufacturers, many gas booster pumps have high energy consumption and low power, and the supercharging is out of proportion, which seriously affects the power of the users. The manufacturers, under the leadership of chief engineer Zhou, combined with German skills and domestic market, developed the booster pump with the minimum consumption in China, such as reversing valve sleeve and valve with golden ratio The reciprocating core is used to reduce the amount of gas in the air intake and reduce the frequency of the operation.
总结：就是厂家技能是关键，技能越高越好也会相应的水涨船高。在相同的技能下原料和泵的巨细又会影响到。气体增压泵或空气增压泵精细程度也会影响。低的必定不会好(本钱和技能都要资金的)。高的也不必定好
Conclusion: it is the key to the manufacturer's skills, the higher the skills, the better, and the price will rise accordingly. With the same skills, the size of raw materials and pumps will affect the price. The fineness of the gas booster pump or air booster pump will also affect the price. The price is low will not be good (capital and patent skills need capital). High prices are not necessarily good
This article is organized and released by the gas booster pump. Do you have any understanding of these contents? For more information, please click: http://www.sdjingtuo.com We'll have a lot more to see.
