水压试压机/水压实验设备简介主要应用领域如下
Brief introduction of hydraulic test press / hydraulic test equipment, the main application fields are as follows
压力容器、管道、壳体等需要检测的水压测试领域，仅仅通过更换检测产品，就可以检测各种不同的产品。
Pressure vessels, pipes, shells and other areas need to be tested in the field of hydrostatic testing, only by changing the testing products, can we detect a variety of different products.
水压试压机的技术参数如下
The technical parameters of hydraulic test press are as follows
压力测试精度：小于等于0.5%FS
Pressure test accuracy: less than or equal to 0.5% FS
介质与环境温度：常温
Medium and ambient temperature: normal temperature
工位：标准1工位（可以非标定做）
Station: Standard 1 station (can be customized)
控制方式：计算机型、数显压力控制型、手动型
Control mode: computer type, digital pressure control type, manual type
试验介质：水、油、乳化液
Test medium: water, oil and emulsion
水压试压机基本原理：水压试压机/水压测试台是以工厂驱动气压为动力源，在菲恩特气驱液体增压泵的基础上，通过调节驱动气压实现输出压力的调节。液体增压泵可以说是水压试压机内部的“心脏”
Basic principle of hydraulic test press: the hydraulic test press / water pressure test bench takes the driving air pressure of the factory as the power source. On the basis of feint gas driven liquid booster pump, the output pressure can be adjusted by adjusting the driving air pressure. Liquid booster pump can be said to be the "heart" of hydraulic test press
设备的特点及功能
Features and functions of the equipment
1，可以试下产品的水压测试，泄漏试验，耐压测试，试验压力可调，同时也可以应用于爆破测试
1. It can be used for hydraulic test, leakage test and pressure test of products. The test pressure can be adjusted, and it can also be used for blasting test
2，压力自动补充功能，达到设定压力后自动停止
2. Automatic pressure supplement function, automatically stop when the set pressure is reached
3，管道设计全部采用无缝焊接式链接，技术成熟，设计合理，产品操控简单，外形美观，且维护简单
3. Seamless welded connection is adopted in all pipeline design, with mature technology, reasonable design, simple product control, beautiful appearance and simple maintenance
水压试压机使用注意事项
Precautions for use of hydraulic test press
1，气源、及被试验增压介质干燥、无水分
1. The air source and pressurized medium under test are dry and free of moisture
2，操作人员必须仔细阅读操作手册再使用
2. Operators must read the operation manual carefully before use
3，高压出口螺纹密封要确认严实无泄漏
3. The thread seal of high pressure outlet shall be confirmed to be tight without leakage
About gas liquid booster pump http://www.sdjingtuo.com First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.
