热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯气体增压泵厂家分享氧气增

气体增压泵厂家分享氧气增压系统原理及应用

发布时间:2020-04-08 09:48:47   发布人:http://www.sdjingtuo.com
  你对氧气增压系统了解多少?气体增压泵小编从氧气加压系统的工作原理、注意事项、典型应用以及如何维护四个方面为您介绍。
  How much do you know about the oxygen pressurization system? This paper introduces the working principle, precautions, typical application and how to maintain the oxygen pressurization system.
  一、氧气加压系统的工作原理
  1、 Working principle of oxygen pressurization system
  氧气增压系统核心部分很好,吹氧气机为核心,结合氧气压力表,手阀,氧气瓶,减压阀,高压开关,卸荷阀组成的一组有效的集成系统,氧气输出压力和驱动设备的空气增加几个关系,调整驱动压力可以调节输出压力。操作方便,维修方便,防爆。
气体增压泵
  The core part of the oxygen boosting system is very good. The oxygen blower is the core. It is an effective integrated system composed of oxygen pressure gauge, hand valve, oxygen cylinder, pressure reducing valve, high-pressure switch and unloading valve. The output pressure can be adjusted by adjusting the driving pressure. Easy to operate, easy to maintain, safe and explosion-proof.
  2. 氧气增压系统的注意事项
  2. Precautions for oxygen boosting system
  由于氧的物理特性,在生产和制造过程中需要对产品进行脱脂和无油处理。受压的缸体需要用304或316加工。如果客户有特殊要求,需要与客户的要求进行整合,然后进行设计。客户现场操作人员应仔细阅读氧气加压系统操作手册,严禁燃放烟花爆竹。
  Due to the physical characteristics of oxygen, the products need to be degreased and oil-free in the production and manufacturing process. The cylinder block under pressure needs to be processed with 304 or 316. If the customer has special requirements, it needs to integrate with the customer's requirements and then design. The on-site operation personnel of the customer shall carefully read the operation manual of the oxygen pressurization system, and it is strictly prohibited to set off fireworks and firecrackers.
  氧气增压系统在工业上的典型应用
  Typical application of oxygen boosting system in industry
  1.大型等离子切割机氧气二次加压
  1. Secondary oxygen pressure of large plasma cutting machine
  2.大学实验室氧气压力环境模拟实验
  2. Simulation experiment of oxygen pressure environment in University Laboratory
  3.填充和运输工业用氧气
  3. Filling and transportation of industrial oxygen
  4.锅炉等行业的氧气增压燃烧
  4. Oxygen pressurized combustion in boiler and other industries
  如何维护氧气增压系统
  How to maintain the oxygen boosting system
  1.驱动气压为3-8bar,其中6bar更为经济
  1. The driving air pressure is 3-8bar, of which 6bar is the most economical
  2.将氧气加压,驱动压力清洗,无杂质,流量充足
  2. Pressurize the oxygen, drive the pressure to clean, no impurities, and the flow is sufficient
  3.设备内部的双机应配备双机专用的涡轮机油(助推器缸与驱动缸应分开,不污染氧气)。
  3. The two engines inside the equipment shall be equipped with special turbine oil for the two engines (the booster cylinder and the driving cylinder shall be separated from each other to prevent oxygen pollution).
  以上是气体增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.com
  The above is the relevant content introduced by the gas booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com
新闻: