网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯 - 气体增压泵在塑胶用品上可

气体增压泵在塑胶用品上可以起到什么作用?

发布时间:2020-03-17 10:56:18   发布人:http://www.sdjingtuo.com
  现在社会生活中越来越多的地方使用塑料制品,为了省钱,为了更好的注射更好的产品,大部分的塑料制品制造商选择高压氮气高压空气形成空心产品,解决问题不丰满收缩塑料制品在一起还可以节省原材料,有一个石头砸两只鸟的效果。
  Nowadays, more and more places in social life use plastic products. In order to save money and better inject better products, most plastic product manufacturers choose high-pressure nitrogen and high-pressure air to form hollow products. To solve the problem, they can also save raw materials when they shrink plastic products together, with the effect of one stone hitting two birds.
  下面给大家简单介绍一下气体增压泵在气体注射成型中的作用。气体注射成型通常采用氮气作为注射气体,氮气是一种不应因高压和高温而改变的惰性气体。气体注射成型中的氮气压力取决于现场,一般为30-130bar (kg)。这主要体现在成品的壁厚和原材料上。
气体增压泵
  Here is a brief introduction to the role of gas booster pump in gas injection molding. Nitrogen is usually used as injection gas in gas injection molding. Nitrogen is an inert gas that should not be changed due to high pressure and high temperature. The nitrogen pressure in gas injection molding depends on the site, generally 30-130bar (kg). This is mainly reflected in the wall thickness of finished products and raw materials.
  衣架、厚边托盘等主要用于节约成本,处理收缩胶压力一般为30-50bar。汽车拉手、精品玩具等内部中空相对较大,需求压力相对较高,一般维持在120-130bar。在这种情况下,压力差可分为气体增压系统的中压和高压。例如,DTA10可以将制氮机的氮气压力增加到80bar, DTT25可以将制氮机的氮气压力增加到200bar。
  Hanger, thick edge tray, etc. are mainly used to save cost, and the pressure of processing shrinkable rubber is generally 30-50bar. Automobile handle, high-quality toys and other internal hollow relatively large, relatively high demand pressure, generally maintained at 120-130bar. In this case, the pressure difference can be divided into medium pressure and high pressure of the gas boosting system. For example, dta10 can increase the nitrogen pressure of the nitrogen generator to 80 bar, and dtt25 can increase the nitrogen pressure of the nitrogen generator to 200 bar.
  气体注射成型较重要的是现场的条件和要求,可以选用气体注射成型助剂和高压气体助推器系统,关于节省资金和收缩塑料不能气体注射助剂。压力和中空度的具体参数在塑料生产厂家是不同的。
  Gas injection molding is more important to the site conditions and requirements, can choose gas injection molding AIDS and high-pressure gas booster system, about saving money and shrinking plastic can not gas injection AIDS. The specific parameters of pressure and hollowness are different in plastic manufacturers.
  以上是气体增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.comThe above is the relevant content introduced by the gas booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com

13188935873

qq