网站公告:

产品中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯 - 气液增压器,气液增压泵的

气液增压器,气液增压泵的区别是什么

发布时间:2019-09-26 18:12:42   发布人:http://www.sdjingtuo.com
  气液增压器,气液增压泵,大活塞的原则是促进小活塞,由于地区差异,使液体压力放大,F =但两者之间的本质区别是,气液增压通常是一个往复运动,不连续运动,进出口单向阀,挂油杯,一般与压力脉冲,冲压和其他场合;气液增压泵可以依靠自己的换向阀,连接到连续往复运动的压缩空气中,进出口用单向阀,液体连续,一般用于压力检测。
  The principle of gas-liquid supercharger, gas-liquid supercharger pump and large piston is to promote small piston. Because of regional differences, the liquid pressure is enlarged. F = But the essential difference between them is that gas-liquid supercharger is usually a reciprocating motion, discontinuous motion, import and export one-way valve, oil cup, pressure pulse, stamping and other occasions. Relying on their own reversing valve, connected to the continuous reciprocating movement of compressed air, import and export with one-way valve, liquid continuous, generally used for pressure testing.
气液增压泵
  该气体增压泵由活塞端大面积低压气体驱动,在活塞端产生少量高压流体。它可以用来压缩空气和其他气体。输出压力可通过驱动压力无级调节。大流量输出:驱动泵只需要0.3-0.8mpa压缩空气即可获得大流量输出。工作时,泵将迅速往复运动。当输出压力接近压力设定值时,泵的往复运动速度会减慢,直至停止。并保持压力,此时的能耗非常小,没有热气体增压泵的生产,没有零件的运动。当压力平衡被打破时,气动增压泵自动开始工作到下一个平衡。
  The gas booster pump is driven by a large area of low pressure gas at the piston end, which produces a small amount of high pressure fluid at the piston end. It can be used to compress air and other gases. The output pressure can be steplessly adjusted by driving pressure. Large flow output: Driving pump only needs 0.3-0.8 MPa compressed air to achieve large flow output. When working, the pump will move rapidly back and forth. When the output pressure is close to the set pressure, the reciprocating speed of the pump will slow down until it stops. And keep the pressure, at this time the energy consumption is very small, there is no production of hot gas booster pump, no movement of parts. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance.
  高压部分由不锈钢制成。高压柱塞采用双密封不锈钢制造。维修气动增压泵零件及密封件简单,维修简单,成本低。所有“O”型密封圈的泵系列相同,易损坏的部件的维修包可以互相替换,大大降低了维修成本。气动增压泵出厂前已注满润滑油,工作时无外部润滑。
  The high pressure part is made of stainless steel. The high pressure plunger is made of double sealed stainless steel. Maintenance of pneumatic booster pump parts and seals is simple, simple maintenance, low cost. All "O" type seals have the same pump series. Maintenance packages of easily damaged parts can be replaced with each other, which greatly reduces the maintenance cost. The pneumatic booster pump has been filled with lubricating oil before it leaves the factory. There is no external lubrication when it works.
  以上是对“气液增压器,气液增压泵的区别是什么”相关介绍,本文来源:http://www.sdjingtuo.comAbove is a related introduction to "What is the difference between gas-liquid supercharger and gas-liquid supercharger pump". This article is from http://www.sdjingtuo.com.
 

13188935873

qq