增压缸设备固定办法一般采用法兰板设备或直接用端盖固定设备，可选前法兰板设备或后法兰板设备等方式，法兰板通过精加工可准确的把增压缸定位设备在机器上，即通过其前端或后端法兰板或端盖上的螺纹孔与机体台板固定，具体得看客户要求而定。而设备办法又可细分为如下：
The fixing method of supercharged cylinder equipment generally adopts flange plate equipment or end cap fixing equipment directly. Front flange plate equipment or back flange plate equipment can be selected. Flange plate can accurately fix the positioning equipment of supercharged cylinder on the machine through its front or rear flange plate or end cap screw hole, depending on the customer's requirements. The equipment method can be subdivided into the following:
1、正装之前法兰板设备（前轴向下出力）
1. Flange Plate Equipment (Front Axial Down Output) before Formal Installation
通过其前端法兰板上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the front flange plate.
前法兰板设备增压缸
Front Flange Equipment Supercharging Cylinder
2后法兰板设备增压缸
2. Supercharging Cylinder for Back Flange Equipment
3、正装之后法兰板设备（前轴向下出力）
3. Flange Plate Equipment (Front Axis Down Output)
通过其后端法兰板上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the back flange plate.
4、水平卧式设备（横向出力）
4. Horizontal Equipment (Horizontal Output)
通过其前端法兰板上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the front flange plate.
水平卧式设备增压缸
Horizontal Supercharging Cylinder
倒装型增压缸
Inverted Turbocharger Cylinder
5、倒装（前轴向上出力）
5. Inversion (Front Axis Output)
通过其前端法兰板上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the front flange plate.
6、任意角度设备（任意角度出力）
6. Arbitrary Angle Equipment (Arbitrary Angle Output)
通过其前端法兰板上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the front flange plate.
任意角度设备增压缸
Turbocharger Cylinder of Arbitrary Angle Equipment
端盖设备增压缸
Turbocharger Cylinder for End Cover Equipment
7、直接采用端盖设备
7. Direct use of end cap equipment
通过其前端端盖上的螺纹孔与机体台板固定
Fixed with the body platform plate through the thread hole on the front end cover.
法兰板的四个孔位用于衔接固定设备和增压缸产品，而不同设备上设备孔位标准是有所差异的，假设没注意到设备法兰标准的问题，将会导致孔位对不上无法正常设备使用等等问题产生，所以我们必定要注意这个问题。
The four holes of flange plate are used to connect fixed equipment and supercharged cylinder products, but the standard of hole position of equipment on different equipment is different. If we do not pay attention to the problem of flange standard of equipment, it will lead to problems such as the hole position can not be used properly, so we must pay attention to this problem.
The above content is supplied by Friendship of Gas Supercharging Pump. For more excitement, please click: http://www.sdjingtuo.com. We insist on honesty-based operation outline, welcome your cooperation!
