The gas booster pump can be used to pressurize the air, but the air booster pump can not pressurize the gas (the principle is that it can be pressurized, but the drive also needs to be the same gas as the pressurized gas, so it is not recommended).
One, cylinder diameter, travel; you can see the volume of the gas and liquid supercharging pump intuitively, the bigger the diameter of the cylinder, the higher the price of the gas and liquid pump, the larger the output flow of the cylinder and the large pressure pump, and it also determines the stability of the pump, but the cylinder diameter of the pump depends on the customer. The requirements for the working conditions of the site;
Two, another decisive factor is the booster ratio of gas liquid booster pump. The higher the pressure ratio is, the greater the pressure output, the tighter the requirements for the seal and the material. When the customer chooses the gas pump, we must pay attention to the demand for the output pressure of the pump.
Three, some gas-liquid supercharging pumps are restricted by the particularity of the supercharged medium (corrosive, thick viscosity and so on). It is necessary to make special customization. In this case, the manpower and cost of the pump need to be invested, so the price of the gas and liquid pump will be high. In general, the price is quoted at the non - standard price.