热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯增压泵的工作原理及特点

增压泵的工作原理及特点

发布时间:2017-09-08 17:12:34   发布人:http://www.sdjingtuo.com
气体增压泵利用大面积活塞的低压气体驱动而在小面积活塞上产生高压气体。可用于压缩空气及其他气体,输出气压可通过驱动气压无级调节。
A gas booster pump uses a low-pressure gas driven by a large area of piston to produce high pressure gas on a small area of the piston. The utility model can be used for compressed air and other gases, and the output air pressure can be continuously regulated by driving air pressure.
气体增压泵有单作用泵和双作用泵。双作用泵气活塞在往复两个冲程中都压缩气体。当驱动气体作用于气活塞时,工作活塞随气驱动就可获得较大的输出流量。气体增压泵具有以下特点:

The gas booster pump has single acting pump and double acting pump. The double acting air pump piston compresses the gas in two strokes of the reciprocating stroke. When the driving gas acts on the gas piston, the working piston can obtain larger output flow with the gas driving. The gas booster pump has the following characteristics:
1、维护简单:增压泵的零件及密封少,维护简单且成本低着一起复增压。
1, maintenance simple: booster pump parts and sealing less, simple maintenance and low cost, together with supercharging.
2、性价比高:增压泵具有输出性能高而成本低的特性。
2, cost-effective: booster pump with high output performance and low cost characteristics.
3、可调性强:增压泵输出压力和流量都由驱动气体的压力调节阀准确地调节。调节驱动气压,使气压管道增压泵的输出压力在预增气压和较大输出压力之间精确调整。
3, adjustable strong: booster pump output pressure and flow by the drive gas pressure regulating valve accurately adjusted. Adjusting the driving pressure, the output pressure booster pump pressure pipeline precise adjustment between the pre pressure and maximum output pressure.
4、输出压力高:气动液体管道增压泵的高工作压力可达到700Mpa,气动气体管道增压泵的高工作压力可达到300 Mpa。
4, output pressure high: pneumatic liquid pipeline booster pump maximum working pressure can reach 700Mpa, pneumatic gas pipeline booster pump maximum working pressure can reach 300 Mpa.
5、材质:增压泵高压部分材质为硬质铝合金。高压柱塞材质为不锈钢。并采用双层密封。关键部位材质可以根据介质性制选配。
5, material is excellent: booster pump high pressure part of material is hard aluminum alloy. The high pressure plunger is made of stainless steel. Double seal is adopted. The key parts can be chosen according to the medium system.
以上介绍希望对您有所帮助,我们的产品质量好,合理,真诚欢迎大家来选购,我们竭诚为您服务。
The above introduction, I hope to help you, our products are of good quality and reasonable prices, we sincerely welcome you to buy, we wholeheartedly for your service.
新闻: