热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态脉冲试验台的组成部门有哪

脉冲试验台的组成部门有哪些?

发布时间:2023-03-02 17:41:46   发布人:http://www.sdjingtuo.com
脉冲试验台通过设定自动完成压力和温度的调节和控制,使被测件达到实际使用的工作状态,进行疲劳寿命检测,很终确定产品的性能。脉冲试验台采用计算机与PLC结合的控制方式,通过闭环控制实现任意波形的生成和调整。设备适用于橡胶软管、汽车制动管、动力转向管、离合器管、汽车空调及散热器软管等压力脉冲测试,同时也可以对一些小型的管件、接头等进行脉冲试验。
The pulse test bench can automatically adjust and control the pressure and temperature through setting, so that the tested parts can reach the actual working state, and carry out fatigue life detection, and finally determine the performance of the product. The pulse test bench adopts the control mode of combination of computer and PLC, and realizes the generation and adjustment of arbitrary waveform through closed-loop control. The equipment is applicable to the pressure pulse test of rubber hose, automobile brake pipe, power steering pipe, clutch pipe, automobile air conditioner and radiator hose, and can also conduct pulse test on some small pipe fittings and connectors.
脉冲试验机主要用于以下零部件的出厂检测:汽车软管类: 转向管、刹车管、空调管、燃油管、冷却水管、散热软管、暖风软管、空气滤芯器软管、涡轮增压系统软管、工程液压软管;航空软管和管汇;其他硬管或接头以及汽车刹车泵、散热器、油冷器、缸体的脉冲试验。输油软管及组合件、制动软管、水箱软管及组合件、水箱、油箱、冷凝器、蒸发器、储液罐、过滤器等
The pulse tester is mainly used for the delivery inspection of the following parts: automotive hoses: steering pipes, brake pipes, air conditioning pipes, fuel pipes, cooling water pipes, radiator hoses, heating hoses, air filter hoses, turbocharging system hoses, engineering hydraulic hoses; Aviation hoses and manifolds; Impulse test of other hard pipes or joints, as well as automobile brake pump, radiator, oil cooler and cylinder block. Oil delivery hose and assembly, brake hose, water tank hose and assembly, water tank, oil tank, condenser, evaporator, liquid storage tank, filter, etc
气液增压泵
脉冲试验台由3 个主要部分组成:
The pulse test bench consists of three main parts:
1. 液压系统:循环泵、脉冲发生器。
1. Hydraulic system: circulating pump, pulse generator.
2. 试验柜:主要用于安装待试验的被测件,调压及系统压力指示。
2. Test cabinet: mainly used for installing the tested parts to be tested, regulating the pressure and indicating the system pressure.
3. 电器控制柜及计算机测试系统:启动按钮和仪表均安装在操纵台上,便于集中控制和监测情况,计算机系统可以采集试验压力波形、试验次数、脉冲频率等参数且具备报表打印功能,并有故障通告功能。
3. Electrical control cabinet and computer test system: the start button and instrument are installed on the console for centralized control and monitoring. The computer system can collect the test pressure waveform, test times, pulse frequency and other parameters, and has the function of report printing and fault notification.
新闻: