Resolution of the pneumatic booster pump pressure than knowledge, everybody quickly look at:

　　气动增压泵的增压比实际为驱动活塞与高压活塞（或柱塞）的面积比。汉派瑞气动增压泵的驱动气压要求为0.3-0.8MPa,对于一款增压泵来讲，增压比是固定的，驱动气压0.3-0.8MPa，并不是讲0.3MPa与0.8MPa，增压泵的输出压力是一样的，输出压力是根据驱动气压的变化而变化的，所以在选型时不能只看我们增压泵的较大输出压力，也要看一下工厂的压缩空气的供气状况。

　　Pneumatic booster pump pressure ratio for actual drive piston and the area ratio of high-pressure piston or plunger. Han sent to turn move booster pump driven by air pressure requirements for 0.3 0.8 MPa, for a booster pump, pressure ratio is fixed, drive pressure, 0.3 to 0.8 MPa, is not about 0.3 MPa to 0.8 MPa, the output of the booster pump pressure is the same, the output pressure is changing according to the driving pressure, when the selection so can't just look at our maximum pressure booster pump, also want to have a look at the compressed air supply condition of the factory.

　　对于某些客户想通过计算机进行数据采集和数据分析，如客户需要的较大压力100MPa ,想用一台增压泵实现从0-100MPa的压力调节，是否可行。一般情况下是不可行的，尤其是试验介质为液体，如果被测产品容积较小，升压速度比较迅速，再者汉派瑞气动增压泵小启动气压（无负载状态下）0.15MPa，我们所建议的小驱动气压为0.25-0.3MPa之间，气压力在0-0.25MPa之间的气压基本无法调节。再加之有些增压泵供应商习惯称气增压泵输出压力无级可调，容易让人产生误解，无级可调是有压力区间的。

　　For some clients want to through the computer data acquisition and data analysis, such as customer need the maximum pressure of 100 mpa, want to use a booster pump from 0-100 mpa pressure adjusting, whether it is feasible. In general it is not feasible, especially the test medium for liquid, if the products to be measured volume smaller, booster speed is more quickly, moreover han sent to turn move booster pump minimum start-up pressure (no load condition) 0.15 MPa, we suggest the minimum driving pressure between 0.25 0.3 MPa, the pressure of the gas pressure between 0-0.25 MPa basic cannot adjust. Plus some of the booster pump supplier habits according to gas booster pump output pressure stepless adjustable, misleading, stepless adjustable pressure range.

　　您的需求就是我们努力的方向，您的追求就是我们的追求，欢迎您的到来，我们一起进步，一起创新！

　　Your demand is our direction, your goal is our pursuit, welcome your arrival, we progress together, together, innovation!