网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 气体增压机的典型应用

气体增压机的典型应用

发布时间:2021-11-07 12:35:47   发布人:http://www.sdjingtuo.com
气体增压泵利用压缩空气作为动力,不需要电源,无火花产生,适合煤矿、石油石化等需要防爆的场合。
The gas booster pump uses compressed air as power without power supply and spark generation. It is suitable for explosion-proof occasions such as coal mine, petroleum and petrochemical industry.
适用于大部分气体增压,可以对氩气、二氧化碳、天然气、氦气、氢气和氮气增压。
It is suitable for pressurization of most gases and can pressurize argon, carbon dioxide, natural gas, helium, hydrogen and nitrogen.
美国原装进口HASKEL气体增压泵增压压力达269MPa。
The maximum boost pressure of Haskel gas booster pump imported from the United States is 269mpa.
高压腔体与外界隔离,保证高压腔内的气体不被污染。
The high-pressure chamber is isolated from the outside to ensure that the gas in the high-pressure chamber is not polluted.
自带冷却,无油润滑,气动活塞环及其他气动部件在工作状态时不需要添加润滑油,节省运行成本,防止油气污染,满足环保要求。
It has its own cooling and oil-free lubrication. The pneumatic piston ring and other pneumatic components do not need to add lubricating oil in the working state, so as to save the operation cost, prevent oil-gas pollution and meet the requirements of environmental protection.
气体增压泵
当达到设定输出压力,大小活塞达到里的平衡,增压泵停止工作,此时不再消耗能量,也没有任何热量产生,具有良好的压力保持特性。当有压力泄漏时,增压泵自动补充压力,频繁启动无任何影响。
When the set output pressure is reached, the balance between the large and small pistons is reached, and the booster pump stops working. At this time, no energy is consumed and no heat is generated. It has good pressure holding characteristics. When there is pressure leakage, the booster pump automatically replenishes pressure, and frequent startup has no impact.
多级泵组合可满足客户对不同压力和不同流量的要求。
The multi-stage pump combination can meet the requirements of customers for different pressures and flows.
通常根据客户工况要求非标定制
It is usually customized according to the customer's working conditions
气体增压系统典型应用
Typical application of gas pressurization system
阀门、管件、压力容器等气密性试验
Air tightness test of valves, pipe fittings, pressure vessels, etc
氦气检漏及回收
Helium leak detection and recovery
高压气瓶充瓶和蓄能器充气
High pressure cylinder and accumulator charging
潜水和消防呼吸气瓶充气
Diving and fire breathing cylinder inflation
禁油表和压力传感器的标定
Calibration of fuel gauge and pressure sensor
气体辅助注塑和CO2发泡
Gas assisted injection molding and CO2 foaming
本文的内容是由气体增压泵给您提供,我们专注客户需求,不断的发展,为客户提供更多的服务,详情可参考我们的网站http://www.sdjingtuo.com
The content of this article is provided to you by the gas booster pump. We focus on customer needs, continuous development and provide customers with more services. For details, please refer to our website http://www.sdjingtuo.com
新闻推荐:
增压泵自控阀由哪些部分组成? 2021-12-02
气液增压泵输出力是怎么样的? 2021-11-23
气体增压泵可以在哪些方面扩大使用了? 2021-11-20
气体增压机的典型应用 2021-11-07
气动增压泵与电动泵相比具有什么优点? 2021-10-19
气体增压泵工作原理及使用注意事项! 2021-10-11
温度太低”对压缩空气增压阀有什么影响? 2021-10-02
如何调节气动液体增压泵? 2021-09-24
气动气体增压泵报价与什么因素有关? 2021-09-15
气体增压泵为什么要根据现场情况配储气罐 2021-09-08

13188935873

qq