热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态气体增压泵为什么要根据现

气体增压泵为什么要根据现场情况配储气罐

发布时间:2021-09-08 14:40:39   发布人:http://www.sdjingtuo.com
气体增压泵主要作用是对压缩空气压力不足进行二次增压使用,多用在工厂局部气压不足使用,不用对气体管路进行改造,不用添置高压空压机。具有经济实惠,安 全防爆,噪音低等多种优点。下面小编对气体增压泵在什么情况下要配储气罐,怎么配做下简单的介绍。
The main function of the gas booster pump is to conduct secondary pressurization for insufficient compressed air pressure. It is mostly used for insufficient local air pressure in the factory. There is no need to transform the gas pipeline and add a high-pressure air compressor. It has the advantages of economy, safety, explosion-proof and low noise. The following is a brief introduction to the circumstances under which the gas booster pump should be equipped with an air storage tank and how.
工厂压缩空气压力不足一般都会配置压缩空气增压泵,简单实用有效率。但是压缩空气增压泵的储气罐要怎么配置呢?这个就要看现场的压缩空气使用情况来定,一般分为瞬间耗气量,持久耗气量,一股一股耗气量等。
If the compressed air pressure of the factory is insufficient, the compressed air booster pump is generally configured, which is simple, practical and efficient. But how to configure the air storage tank of the compressed air booster pump? This depends on the use of compressed air on site. It is generally divided into instantaneous gas consumption, lasting gas consumption, one by one gas consumption, etc.
瞬间耗气量:这个一般多为阀门开关,空气炮等领域使用。特征为增压储气时间长,瞬间消耗大。这时压缩空气增压泵配备的罐体内的压缩空气,要达到设备所需瞬间消耗量,配备的罐体一般都不会太小,可以根据设备瞬间消耗来选择储气罐的大小。
Instantaneous gas consumption: This is generally used in valve switch, air gun and other fields. It is characterized by long pressurization and gas storage time and large instantaneous consumption. At this time, the compressed air in the tank equipped with the compressed air booster pump should reach the instantaneous consumption required by the equipment. Generally, the tank equipped will not be too small. The size of the air storage tank can be selected according to the instantaneous consumption of the equipment.
持久耗气:这种情况多见于气体吹扫,着种情况下设备对气源要求是稳定的气压输出,选择多为空气增压泵流量来选型,空气增压泵型号流量大选择储气罐也就越大,流量小相应的储气罐也小。
Lasting gas consumption: this situation is often seen in gas purging. In this case, the equipment requires stable air pressure output for the air source, and the selection is mostly based on the flow of the air booster pump. The larger the flow of the air booster pump model, the larger the air tank is selected, and the smaller the flow is, the smaller the corresponding air tank is.
一股一股的耗气:这种多见与气缸,气动阀等使用。这种情况下设备使用压缩空气多为,消耗以下停以下。这种情况要看设备对压缩空气的消耗量,如果小的话可以不用储气罐,大的话可以配备小型储气罐。
One by one air consumption: this kind is often used with cylinders, pneumatic valves, etc. In this case, the compressed air used by the equipment is mostly below consumption and below shutdown. This situation depends on the compressed air consumption of the equipment. If it is small, it can be equipped with small air tanks.
总之客户现场情况千变万化,实在掌握不好的话可以咨询菲恩特销售工程师,让销售工程师帮忙。
In short, the customer's on-site situation is ever-changing. If you really can't master it well, you can consult feinte's sales engineer and ask the sales engineer to help recommend it.
新闻: