气动增压泵分为气液增压泵,气体增压泵气液增压泵原理是利用大面积活塞的低气压产生小面积活塞的高液压。
Pneumatic booster pump is divided into gas-liquid booster pump. The principle of gas-liquid booster pump is to use the low pressure of large area piston to produce high hydraulic pressure of small area piston.
电动泵,即用电驱动的泵,电动泵是由泵体扬水管泵座潜水电机(包括电缆)和起动保护装置等组成。泵体是潜水泵的工作部件,它是由进水管导流壳逆止阀泵轴和叶轮等零部件组成,叶轮在轴上的固定有两种方式。
Electric pump, namely the pump driven by electricity, is composed of pump body, lifting pipe, pump seat, submersible motor (including cable) and starting protection device. Pump body is the working part of submersible pump, which is composed of inlet pipe guide shell check valve, pump shaft, impeller and other parts. The impeller is fixed on the shaft in two ways.
气动增压泵与电动泵相比具有哪些优点呢
What are the advantages of pneumatic booster pump compared with electric pump
可保持在任何预定压力下,不再消耗能量和产生热量不产生热量,不会有火花和火焰危险
Can be maintained at any predetermined pressure, no longer consume energy and generate heat, no heat, no spark and flame hazard
容易应用于自动控制系统中
It is easy to be used in automatic control system
连续启停,不受限制,并无不良影响
Continuous start stop, unlimited, no adverse effects
压力线性输出,容易人工控制
Pressure linear output, easy manual control
轻便可靠,易于维护,坚固耐用
Light and reliable, easy to maintain, durable
以压缩空气为动力源,不需使用电源
Using compressed air as power source, no power supply is needed
运行时无油润滑。
No oil lubrication during operation.
达7000bar的增压能力,满足大多数高压需要
Up to 7000bar pressurization capacity to meet most high pressure requirements
气动活塞环及其他气动部件在工作状态时不需要添加润滑油,节省运行成本,并可防止油气污染环境
The pneumatic piston ring and other pneumatic parts do not need to add lubricating oil when they are working, which can save operation cost and prevent oil and gas from polluting the environment
There are not many wonderful contents. Please collect them as soon as you see them! Gas liquid booster pump for you to push wonderful content, please pay attention to our website: http://www.sdjingtuo.com It is worth recommending