网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 气动增压泵的可控制调节要

气动增压泵的可控制调节要注意什么?

发布时间:2020-10-15 13:17:56   发布人:http://www.sdjingtuo.com
性价比高——具有输出性能高而成本低的特性。
High cost performance - it has the characteristics of high output performance and low cost.
维护简单——气动增压泵的零件及密封少,维护简单且成本低。
Simple maintenance - pneumatic booster pump has less parts and seals, simple maintenance and low cost.
可调性强——压力和流量都由驱动气体的压力调节阀准确地调节。
Strong adjustability - the pressure and flow are accurately regulated by the pressure regulating valve of the driving gas.
工作原理——气动增压泵利用大面积活塞端低压气体驱动而产生小面积活塞端的高压流体。
Working principle: pneumatic booster pump uses low pressure gas at large area piston end to generate high pressure fluid in small area piston end.
气体增压泵
应用灵活——从简单的手工操作到全自动化操作,气动增压泵适用于各个应用领域。在同一系列里的大多数型号的泵的空气马达是可互换的。自动重启——工作时,气动液体增压泵迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时能量消耗很小,无热量产生,无零件运动。当压力平衡打破后,气动泵自动开始工作到下一个平衡。适用范围广——气动增压泵可以用于油类或水等绝大部份液体。输出压力高——气动增压泵的工作压力可达到73,000psi(503Mpa)甚至可达700Mpa。输出流量大——气动增压泵只需100psi(0.69Mpa)压缩空气驱动就可获得较大的输出流量。根据不同工作要求,气动增压泵有多种系列产品可供用户选择。
Flexible application - from simple manual operation to fully automatic operation, pneumatic booster pump is suitable for various application fields. The air motors of most pump models in the same series are interchangeable. Automatic restart: when working, the pneumatic liquid booster pump quickly reciprocates. When the output pressure is close to the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time the energy consumption is very small, no heat generation, no part movement. When the pressure balance is broken, the pneumatic pump automatically starts to work to the next balance. Wide range of application - pneumatic booster pump can be used for most liquids such as oil or water. High output pressure - the maximum working pressure of pneumatic booster pump can reach 73000psi (503mpa) or even 700MPa. Large output flow: the pneumatic booster pump only needs 100psi (0.69mpa) compressed air drive to obtain a larger output flow. According to different working requirements, pneumatic booster pump has a variety of products for users to choose.
上面的内容就是今天小编给大家介绍的内容了,我们真诚为您提供气体增压泵服务,您的满意就是我们的责任,欢迎在网站下方留言:http://www.jnyhrs.com
The above content is the content introduced to you today. We sincerely provide you with laboratory decoration service. Your satisfaction is our responsibility. Welcome to leave a message at the bottom of the website: http://www.jnyhrs.com

13188935873

qq