热线电话
0531-69951198
网站首页
关于精拓
产品展厅
新闻中心
原理选型
客户案例
在线留言
联系我们
网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态水压测试设备的选择应该怎

水压测试设备的选择应该怎么挑选参数?

发布时间:2020-09-26 15:46:49   发布人:http://www.sdjingtuo.com
一.应用范围
1、 Scope of application
水压测试设备主要用于以下零部件的出厂检测:汽车软管类:转向管、刹车管、空调管、燃油管、冷却水管、散热软管、空气滤芯器软管、涡轮增压系统软管;工程液压软管,主要用于液压设备、工程机械、矿山机械等液压管爆破试验;航空软管和管汇;其他硬管或街头以及汽车刹车泵、缸体。
The hydraulic test equipment is mainly used for the factory inspection of the following parts: Automobile hose: steering pipe, brake pipe, air conditioning pipe, fuel pipe, cooling water pipe, heat dissipation hose, air filter hose, turbocharging system hose; engineering hydraulic hose, mainly used for hydraulic pipe burst test of hydraulic equipment, engineering machinery, mining machinery; aviation hose and manifold; other hard pipes Or street and car brake pump, cylinder block.
二、系统特点
2、 System features
技术,结构设计合理,具有体积小、重量轻、外形美观大方的特点;
Advanced technology, reasonable structure design, small size, light weight, beautiful appearance;
所有承压零件都都采用知名的标准零件,无任何焊接连接、方便拆卸,系数高,寿命长,便于维护;
All pressure bearing parts are standard parts of international famous brands, without any welding connection, convenient disassembly, high safety factor, long service life and easy maintenance;
数据报告:可根据需要打印相应的数据报告;
Data report: the corresponding data report can be printed as required;
加紧方式:自动加紧(于非标产品设计
气体增压泵
Tightening mode: automatic tightening (only for non-standard product design
数据采集:压力及温度采集软件,并显示曲线(计算机类别);
Data acquisition: professional pressure and temperature acquisition software, and display curve (computer category);
数据储存:保存数据到Excel表格,可随时查看数据;
Data storage: save the data to excel, and you can view the data at any time;
三、主要技术参数
3、 Main technical parameters
水压测试设备,驱动气压范围:0.3-0.8Mpa;且输出压力和驱动气压成正比
Hydraulic test equipment, driving pressure range: 0.3-0.8mpa, and output pressure is proportional to driving pressure
耗气量:
Maximum gas consumption:
压力测试范围:0-320Mpa,根据客户实际需求,选择相对应的压力
Pressure test range: 0-320mpa, select the corresponding pressure according to the actual needs of customers
工作介质:水.液压油、乳化液等
Working medium: water, hydraulic oil, emulsion, etc
加压速率:小于等于
Pressurization rate: less than or equal to
电源电压:交流
Supply voltage: AC
新闻: