1.利用压缩空气作为动力，不需要电源，无火花产生，适合煤矿、石油石化等需要防爆的场合。
1. Compressed air is used as power, no power supply is needed, and no spark is generated. It is suitable for coal mine, petroleum and petrochemical industries where explosion-proof is required.
2.适用于大部分气体增压，可以对氩气、二氧化碳、天然气、氦气、氢气和氮气增压。
2. Suitable for most gas pressurization, it can pressurize argon, carbon dioxide, natural gas, helium, hydrogen and nitrogen.
3.汉派瑞气体增压泵增压压力达80MPa。
3. The maximum boosting pressure of hamprey gas booster pump is 80 MPa.
4.高压腔体与外界隔离，保证高压腔内的气体不被污染。
4. The high-pressure chamber is isolated from the outside to ensure that the gas in the high-pressure chamber is not polluted.
5.自带冷却，无油润滑，气动活塞环及其他气动部件在工作状态时不需要添加润滑油，节省运行成本，防止油气污染，满足要求。
5. Self cooling, oil-free lubrication, no lubricating oil is needed for pneumatic piston ring and other pneumatic parts in working state, which can save operation cost, prevent oil and gas pollution and meet environmental protection requirements.
6.当达到设定输出压力，大小活塞达到里的平衡，增压泵停止工作，此时不再消耗能量，也没有任何热量产生，具有良好的压力保持特性。当有压力泄漏时，增压泵自动补充压力，频繁启动无任何影响。
6. When the set output pressure is reached, the big and small pistons reach the balance, and the booster pump stops working. At this time, there is no energy consumption and no heat generation. It has good pressure retention characteristics. When there is pressure leakage, the booster pump automatically replenishes the pressure, and frequent starting has no effect.
7.多级泵组合可满足客户对不同压力和不同流量的要求。
7. The multi-stage pump combination can meet the customer's requirements for different pressures and flows.
8.通常根据客户工况要求非标定制
8. It is usually non-standard customized according to the requirements of customer working conditions
气体增压增压系统典型应用
Typical application of gas supercharging system
阀门、管件、压力容器等提供气密性测试
Provide air tightness test for valves, fittings, pressure vessels, etc
氦气检漏及回收
Helium leak detection and recovery
氮气瓶填充和蓄能器充气
Nitrogen cylinder filling and accumulator charging
潜水和消防呼吸气瓶充气
Inflation of diving and fire breathing cylinders
禁油表和压力传感器的标定
Calibration of fuel forbidden gauge and pressure sensor
气体辅助注塑和CO2发泡
Gas assisted injection molding and CO2 foaming
Thank you for reading. This article is from: gas booster pump. For more information and questions, please click: http://www.sdjingtuo.com We will continue to work hard to provide services for you, thank you for your support!
