网站公告:

新闻中心

济南精拓流体设备有限公司

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区西周南路9号

网址:http://www.sdjingtuo.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 高纯气体增压泵增压计算方

高纯气体增压泵增压计算方法是什么?

发布时间:2019-12-31 13:51:40   发布人:http://www.sdjingtuo.com
  如何计算高纯气体增压泵的增压压力?
  How to calculate the boost pressure of high purity gas booster pump?
  首先,什么是高纯气体增压泵?
  First of all, what is a high purity gas booster pump?
  这是我们独立开发的,使用大区域活塞末端的低压气体,在小区域的活塞末端产生高压流体。可用于压缩空气等气体,输出压力可由驱动压力无级调节。自它出现以来,受到了社会各界的热烈欢迎。
  This is our independent development, using the low-pressure gas at the end of the piston in a large area to generate high-pressure fluid at the end of the piston in a small area. It can be used for compressed air and other gases. The output pressure can be adjusted steplessly by the driving pressure. Since its appearance, it has been warmly welcomed by all walks of life.
  气体增压泵、气动增压泵、液体增压泵、液压试验台、爆破试验台厂家生产的高纯气体增压泵增压计算方法是什么?
气体增压泵
  What is the calculation method of high purity gas booster pump produced by the manufacturers of gas booster pump, pneumatic booster pump, liquid booster pump, hydraulic test bench and blasting test bench?
  P(高)= P(驱动)X (S低压气缸/S二次高压气缸)+ P(增加)X (S一次气缸/S二次高压气缸)P(高)是指二次高压气缸的输出气体压力;P(排量)为压缩气体驱动的压力;P为受压气体的初始压强;S低压缸是指低压缸的活塞截面积P (high) = P (drive) x (s low pressure cylinder / s secondary high pressure cylinder) + P (increase) x (s primary cylinder / s secondary high pressure cylinder) P (high) refers to the output gas pressure of the secondary high pressure cylinder; P (displacement) refers to the pressure driven by compressed gas; P refers to the initial pressure of the compressed gas; s low pressure cylinder refers to the piston sectional area of the low pressure cylinderS高压缸是高压缸活塞的端部截面积
  S high pressure cylinder is the end sectional area of high pressure cylinder pistonS型二次高压缸是指二次高压缸活塞端截面积
  S-type secondary high pressure cylinder refers to the sectional area of piston end of secondary high pressure cylinder高纯气体增压泵在哪里发挥重要作用?
  Where does high purity gas booster pump play an important role?
  1.工厂压缩空气二次增压,氮气、氢气加注高压反应釜等需要各种高压气体的场合。
  1. Secondary pressurization of compressed air in the plant, filling of nitrogen and hydrogen into high-pressure reactor and other occasions requiring high-pressure gas.
  2.气辅注射成型。
  2. Gas assisted injection molding.
  3.阀门、管件、冷凝管、空调盘管气密性试验。
  3. Air tightness test of valve, pipe fitting, condenser pipe and air conditioning coil.
  以上是气体增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.sdjingtuo.comThe above is the relevant content introduced by the gas booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com

13188935873

qq