The general air booster system has a series of components such as air booster pump, air storage tank, high pressure pipeline, safety valve, pressure reducing valve, pressure gauge, drain valve, ball valve, etc. Gas liquid booster pump manufacturers take you to understand the risks of incorrect use of air booster system. Most of the risks come from the fuel tank, which is a pressure vessel. You should know that when the pressure of the gas stored in the fuel tank is too high or too hot, it will explode. Gas pressure vessels will explode with the force of bombs, while liquid vessels will only rupture.
The air storage tank used in the air pressurization system is tested by the General Administration of quality supervision, inspection and Quarantine of the people's Republic of China according to the pressure standard and has obtained the safety certificate. For the same pressure and volume of gas storage tank, our products are much better than other wall thickness and quality (we have a carbon steel with a much thicker thickness for other steel), safety factor of external impact tank, safety valve and high-pressure pipeline.
安全阀的压力等级在灵敏度和质量上也有差异，比如1.6mpa安全阀的价格在300-1200元之间，你知道有什么区别吗?便宜一个是壁厚差异,容易爆开,其次,敏感性差异,得到好的1.6 Mpa必须排气不良2 Mpa也不跳或1.2 Mpa排气制造商直接省略了安全阀(部分),高压管道有差异,一些制造商为了节省材料和工时将使用一个软管,软管连接容易老化爆炸和泄漏。散热不完全，导致增压泵使用寿命降低。
There are also differences in the sensitivity and quality of the pressure rating of the safety valve. For example, the price of the 1.6Mpa safety valve is between 300-1200 yuan. Do you know what the difference is? The cheaper one is the difference in wall thickness, which is easy to burst open. Secondly, the sensitivity difference. To get a good 1.6Mpa, it is necessary to exhaust 2 MPa without tripping or the 1.2MPa exhaust manufacturer directly omits the safety valve (part). There are differences in the high-pressure pipeline. Some systems The manufacturer will use a hose to save materials and labor time. The hose connection is prone to aging, explosion and leakage. Incomplete heat dissipation leads to the decrease of service life of booster pump.
After discussing safety, we will discuss the quality of the core components (air booster pump). As the saying goes, without comparison, there is no harm. Well. Obviously, they will choose the latter. There is a big difference between the two. It's a device that consumers can understand.
I will briefly introduce the use of customers. Then dte02, the most basic air booster pump, materials and processing equipment, is the best. The reversing valve is used in the aluminum alloy cylindrical machining center. After processing, the mirror surface roller is processed, and the distance of each space is the same size and distribution. The internal smoothness is very high, so as to ensure the directional sensitivity and durability. The end cover and high-speed sculpture are guaranteed The error of the size and distribution range of each space shall not exceed 1 wire to ensure that the overall sealing performance of the booster pump is directly proportional to the pressure ratio.
The high pressure cylinder of booster pump is made of 304 stainless steel, and the sealing ring is imported from abroad. Materials and technology are the basis for ensuring the durability of products. Do you think the price of complex process and expensive materials will be lower? Do you want to save hundreds of dollars by purchasing cheap, high-quality and safe air booster pump and air booster pump system? Remember the old Chinese saying: cheap things are not good, good things are not cheap.
When the profit is as thin as paper, the material standard is correspondingly reduced, the wall thickness of the gas storage tank is correspondingly reduced, whether the safety valve is correspondingly reduced, the workers are stealing work and cutting materials correspondingly, and the safety assurance is correspondingly reduced. In short, there is no profit, no quality and no after-sales service. Please open your eyes, don't let the hidden dangers around you, don't let the tragedy happen in your own factory.