Before use, the gas pressure pump must be prepared strictly. These safe operation specifications can not only extend the service life, but also greatly guarantee the safety of operators.
1. Before using the pneumatic gas booster pump, the following work must be done:
(1) check whether each pipeline connection is reliable;
(2) each shift shall check whether each pressure indicator is accurate. If it is found that the error is large or the pointer does not move, the manufacturer of the gas booster pump which is 2 times larger shall replace it in time
2. Start the gas booster pump
3. Operation steps after passing through methyl chloride
(1) close the valve of methyl chloride on the kettle, Tangshan gas booster pump manufacturer, then close valve C and valve B on the cylinder;
(2) close valve A and valve D on the methyl chloride cylinder;
(3) close the nitrogen inlet valve of the gas booster pump, and then close the air inlet valve;
(4) this cycle is completed.
The above is the relevant content introduced by the gas booster pump manufacturer. For more information, please visit the website: http://www.sdjingtuo.com